xoviat
df4aa0fe25
stm32: fix low-power test
2023-10-23 16:26:34 -05:00
Andres Vahter
188ee59ba6
stm32: fix setting uart databits
2023-10-23 22:40:24 +03:00
Andres Vahter
591612db7e
stm32 uart: return error if rx and tx not enabled
2023-10-23 22:39:24 +03:00
Dario Nieuwenhuis
82593bd404
stm32/gpio: make port G work on U5.
2023-10-23 18:12:31 +02:00
Dario Nieuwenhuis
a39ae12edc
stm32/rcc: misc cleanups.
2023-10-23 17:36:21 +02:00
Dario Nieuwenhuis
0ef1cb29f7
stm32/rcc: merge wb into l4/l5.
2023-10-23 17:36:21 +02:00
Dario Nieuwenhuis
b9e13cb5d1
stm32/rcc: merge wl into l4/l5.
2023-10-23 00:31:36 +02:00
Dario Nieuwenhuis
412bcad2d1
stm32: rename HSI16 -> HSI
2023-10-22 22:39:55 +02:00
xoviat
7c5f963d1f
stm32: fix opamp bug in docs build
2023-10-21 07:32:04 -05:00
Dario Nieuwenhuis
62e1e1637c
Merge pull request #2097 from embassy-rs/rcc-no-spaghetti
...
stm32/tests: add stm32h753zi, stm32h7a3zi.
2023-10-21 02:49:12 +00:00
Dario Nieuwenhuis
3d03c18d4f
stm32/tests: add stm32h753zi, stm32h7a3zi.
2023-10-21 04:46:45 +02:00
xoviat
0fb677aad7
stm32: update metapac
2023-10-20 20:21:53 -05:00
Dion Dokter
5b3f75dc72
Merge branch 'master' into center-align
2023-10-20 14:17:55 +02:00
Dion Dokter
6f2995cd4c
Invert assert
2023-10-20 10:41:39 +02:00
eZio Pan
241488ef1c
bypass ODEN
if chip doesn't have it
2023-10-18 19:42:31 +08:00
Dario Nieuwenhuis
f20f170b1f
stm32/rcc: refactor and unify f4 into f7.
2023-10-18 05:11:31 +02:00
Dario Nieuwenhuis
67010d123c
stm32/rcc: refactor f7.
2023-10-18 05:01:11 +02:00
Dario Nieuwenhuis
361fde35cf
stm32/rcc: wait for mux switch.
2023-10-18 04:32:18 +02:00
Dario Nieuwenhuis
7ce3b19389
stm32/rcc: remove unused enum.
2023-10-18 04:32:18 +02:00
xoviat
bbd12c9372
stm32: update metapac
2023-10-17 20:31:44 -05:00
xoviat
683d5c3066
Merge pull request #2077 from xoviat/rcc
...
stm32: update metapac
2023-10-17 01:05:18 +00:00
xoviat
a3574e519a
stm32: update metapac
2023-10-16 20:04:10 -05:00
Grant Miller
e7aeb9b29f
stm32f1: Keep flash prefetch enabled
2023-10-16 19:23:01 -05:00
Dániel Buga
40e4ca4751
Prepare embassy-net(/-driver,/-driver-channel) 0.2.0
2023-10-16 20:59:06 +02:00
Dario Nieuwenhuis
213b4c9dca
time: add links
key, release v0.1.5.
2023-10-16 20:11:35 +02:00
Dario Nieuwenhuis
aff77d2b65
stm32/rng: add test.
2023-10-16 05:35:29 +02:00
Dario Nieuwenhuis
18e96898ea
stm32/rcc: unify L4 and L5.
2023-10-16 04:00:51 +02:00
Dario Nieuwenhuis
5c5e681819
stm32/rcc: add better support for L4/L4+ differences.
2023-10-16 03:23:43 +02:00
xoviat
b24520579a
rcc: ahb/apb -> hclk/pclk
2023-10-15 19:51:35 -05:00
xoviat
1fc35c753b
rcc: update pll clock naming
2023-10-15 15:10:42 -05:00
JuliDi
2aaf4bf96b
fix typo in build.rs that caused fmc ClkPin to not be implemented
2023-10-15 19:14:34 +02:00
xoviat
4a156df7a1
stm32: expand rcc mux to g4 and h7
2023-10-14 23:33:57 -05:00
Dario Nieuwenhuis
8a10948ce9
stm32/rcc: port L4 to the "flattened" API like h5/h7.
2023-10-15 03:08:49 +02:00
Dario Nieuwenhuis
3bfbf2697f
stm32/rcc: remove unused lse/lsi fields in h7
2023-10-15 01:48:27 +02:00
xoviat
824556c9c8
rcc: remove mux_prefix from clocks
2023-10-14 12:51:45 -05:00
xoviat
575db17264
Merge pull request #2053 from jr-oss/fix_stm32_advanced_timer_enable_output
...
STM32: Fix regression in advanced timer to enable output of PWM signa…
2023-10-14 04:09:57 +00:00
xoviat
3264941c1b
rcc mux: update metapac
2023-10-13 23:06:32 -05:00
Ralf
9a7fda87b0
STM32: timer enable_output does not take bool, but just enables the output
2023-10-13 18:52:10 +02:00
Ralf
adc810d24b
STM32: Fix regression in advanced timer to enable output of PWM signal by partly reverting commit 74eb519
2023-10-13 17:38:40 +02:00
Scott Mabin
a6bbb130c5
make set_config concrete methods public again
2023-10-12 23:03:33 +01:00
Dániel Buga
02d2c06b23
Release embassy-time 0.1.4
2023-10-12 18:14:33 +02:00
Dario Nieuwenhuis
97ca0e77bf
stm32: avoid creating many tiny critical sections in init.
...
Saves 292 bytes on stm32f0 bilnky with max optimizations (from 3132 to 2840).
2023-10-12 16:20:34 +02:00
Dario Nieuwenhuis
66e399b5c6
Merge pull request #2035 from pbert519/stm_reset_and_enable
...
STM32: combine RccPeripherals reset() and enable() to enable_and_reset()
2023-10-12 14:09:13 +00:00
Ulf Lilleengen
01eb1a7339
Merge pull request #2033 from andresovela/stm32-add-timeout-to-i2c
...
stm32: add timeout to I2C driver
2023-10-12 10:44:27 +00:00
pbert
65f81a1f57
Remove critical section for reset
2023-10-12 11:04:45 +02:00
pbert
ecdd7c0e2f
enable clock first
2023-10-12 11:04:44 +02:00
pbert
d7d79f3068
Remove workaround for adc v3
2023-10-12 11:04:20 +02:00
pbert
f65a96c541
STM32: combine RccPeripherals reset() and enable() to reset_and_enable()
2023-10-12 11:04:19 +02:00
xoviat
57ccc1051a
stm32: add initial rcc mux for h5
2023-10-11 20:59:47 -05:00
Dario Nieuwenhuis
70a91945fc
stm32: remove atomic-polyfill.
2023-10-12 02:07:26 +02:00
Andres Oliva
063e6f96da
Remove outdated comment
2023-10-11 23:56:21 +02:00
Andres Oliva
e6c47c3718
cargo fmt
2023-10-11 23:47:24 +02:00
Andres Oliva
2f7c2750d1
Feature guarded more unused stuff
2023-10-11 23:45:47 +02:00
Andres Oliva
032b1f2d59
Fix some issues with unused stuff
2023-10-11 23:42:40 +02:00
Andres Oliva
f76d50e837
cfg! macro didn't work, had to duplicate functions with different guards
2023-10-11 23:39:24 +02:00
Andres Oliva
ee5ea7aa06
cargo fmt
2023-10-11 23:34:02 +02:00
Andres Oliva
251d004708
Try using cfg! macro
2023-10-11 23:32:40 +02:00
Andres Oliva
cd68f85501
Added guards to individual APIs
2023-10-11 23:25:13 +02:00
Andres Oliva
b6c0ddb7df
Move the feature gates to the i2c module instead of the pub use statement
2023-10-11 23:05:12 +02:00
Andres Oliva
ee93bbf1d4
Gate pub use _version::*
2023-10-11 22:45:54 +02:00
Andres Oliva
1cd3ae9bd5
Add comment about feature gate on I2C mod
2023-10-11 22:20:17 +02:00
Andres Oliva
bfcca79c1e
Add time feature back and gate i2c on time
2023-10-11 22:12:03 +02:00
Dario Nieuwenhuis
4a43cd3982
stm32/rcc: LSE xtal is 32768hz, not 32000hz.
...
Fixes #2043
2023-10-11 13:39:04 +02:00
Dario Nieuwenhuis
b91d1eaca0
stm32/rcc: add LSE/LSI to all chips, add RTC to more chips.
2023-10-11 04:12:38 +02:00
Dario Nieuwenhuis
21915a9a3f
stm32/rcc: unify L0 and L1.
2023-10-11 01:22:27 +02:00
Dario Nieuwenhuis
d0d0ceec6a
stm32/rcc: rename HSE32 to HSE
2023-10-11 01:06:44 +02:00
Dario Nieuwenhuis
0cfa8d1bb5
stm32/rcc: use more PLL etc enums from PAC.
2023-10-11 00:12:33 +02:00
Andres Oliva
cd12c9cbce
stm32: add timeout to I2C driver
2023-10-10 18:20:46 +02:00
Andres Vahter
3616d68aaa
stm32 flash: check lock bit before unlocking
...
It hardfaults if already unlocked flash is unlocked again.
2023-10-10 12:55:43 +03:00
Gabriel Górski
7526b8edba
stm32/eth: Move phy_addr
from Ethernet
to PHY
...
Previously, PHY addressing was a concern of the `Ethernet` struct
which limited the `PHY` implementations which very often have to manage
multiple PHYs internally and thus possibly need to address many of them.
This change extends `StationManagement` to allow addressing different
PHY addresses via SMI.
2023-10-09 13:46:56 +02:00
Dario Nieuwenhuis
6186fe0807
stm32/rcc: use PLL enums from PAC.
2023-10-09 02:48:22 +02:00
xoviat
2e5ab7981e
stm32: update metapac
2023-10-08 18:27:36 -05:00
Dario Nieuwenhuis
9d311121f2
Merge pull request #2022 from HelloWorldTeraByte/impl-pwm-trait
...
Implemented Pwm trait from embedded_hal for simple and complementary pwm
2023-10-07 00:35:05 +00:00
Dario Nieuwenhuis
85c6f23dcb
Merge pull request #2018 from jamesmunns/add-derives
...
Add some uncontroversial derives to Error types
2023-10-07 00:03:10 +00:00
Dario Nieuwenhuis
3bf8e4de5f
Merge pull request #2015 from willglynn/stm32u5_faster_clocks
...
stm32: u5: implement >55 MHz clock speeds
2023-10-06 23:38:15 +00:00
randi
710874021a
Implemented Pwm trait for complementary pwm from embedded_hal
2023-10-07 12:22:31 +13:00
Dario Nieuwenhuis
3a8e0d4a27
stm32: implement MCO for all chips.
2023-10-07 01:15:24 +02:00
randi
b217d147de
Implemented Pwm trait from embedded_hal
2023-10-07 11:57:19 +13:00
shakencodes
68c4820dde
Add MCO support for stm32wl family
2023-10-06 14:37:36 -07:00
Matt Ickstadt
f01609036f
h7: implement RTC and LSE clock configuration
2023-10-06 13:28:30 -05:00
James Munns
930b8f3495
Add some uncontroversial derives to Error types
2023-10-06 17:45:35 +02:00
Will Glynn
38e7709a24
stm32: u5: implement >55 MHz clock speeds
...
This commit allows STM32U5 devices to operate at 160 MHz.
On STM32U5, MSIS can run at 48 MHz and HSE can reach 50 MHz. Faster
clocks require using PLL1's R output, though PLL1 can serve other
functions besides using the R output for the system clock. This commit
extracts a public `PllConfig` struct, primarily to place associated
constructors on that type, but also with an eye towards enabling the P
and Q outputs in a later commit.
STM32U5 PLLs have various frequency requirements on each stage: after
the `m` prescaler, after the `n` multiplier, and after the `r` divider.
This commit implements the associated checks as assertions.
This commit fixes clock calculation and PLL register configuration
errors in PLL initialization.
STM32U5 has a PWR peripheral which can be configured to push Vcore into
different voltage ranges. System clocks exceeding 55 MHz require range
2, and system clocks exceeding 110 MHz require range 1. This commit
adds `voltage_range` to `Config` and configures PWR as directed.
The voltage range implies different performance limits on various clock
signals, including inside a PLL. This commit implements voltage range
<-> frequency range checks as assertions, and extracts the
otherwise-repeated MSIS, HSI16, and HSE initialization into private
methods on `Config`.
STM32U5 frequencies above 55 MHz require using the PWR EPOD booster.
The EPOD booster requires configuring a second `m` term for PLL1,
`mboost`, such that it falls in a particular range. (Recall that >50
MHz cannot be reached without PLL1, so there is no scenario where EPOD
is needed but PLL1 is not.) This commit configures and enables the EPOD
booster automatically as required.
2023-10-05 22:13:27 -05:00
xoviat
42176b1a3a
Merge pull request #2013 from xoviat/opamp
...
stm32: update metapac and fix opamp ch
2023-10-04 21:20:42 +00:00
xoviat
e1a0635ca3
stm32: update metapac and fix opamp ch
2023-10-04 16:15:08 -05:00
Gabriel Górski
c6513f93fe
stm32/gpio: Implement eh1::digital::InputPin
for OutputOpenDrain
...
Pins in open-drain mode are outputs and inputs simultaneously.
2023-10-04 18:20:25 +02:00
Dario Nieuwenhuis
0324cee0ca
update embedded-io, embedded-nal-async.
2023-10-04 00:10:55 +02:00
xoviat
0c4cddfafb
Merge branch 'main' of github.com:embassy-rs/embassy into opamp
2023-10-03 16:44:44 -05:00
xoviat
e561e673c2
stm32: add opamp mod and update pac
2023-10-03 16:34:13 -05:00
xoviat
bb8a1b7f1f
wpan: re-enable HIL tests
2023-10-03 15:53:22 -05:00
Dario Nieuwenhuis
6e901846df
Merge pull request #1995 from JuliDi/quadspi
...
[STM32] QUADSPI support bank 2
2023-10-03 01:55:27 +00:00
xoviat
bc203ebe4b
Merge branch 'main' of github.com:embassy-rs/embassy into fix-stop
2023-10-02 18:30:41 -05:00
xoviat
e042b3056d
stm32: fix stop
2023-10-02 18:11:03 -05:00
Dario Nieuwenhuis
b856d760f4
stm32/rcc: reset backup domain before enabling LSE.
2023-10-02 22:12:50 +02:00
Dion Dokter
a9dc887060
Added clarifying comment
2023-10-02 21:41:30 +02:00
Dion Dokter
137e47f98d
Do affect the frequency
2023-10-02 21:14:44 +02:00
Dario Nieuwenhuis
9228a6334b
Merge pull request #1996 from embassy-rs/update-nightly
...
Update Nightly.
2023-10-02 17:29:21 +00:00
Loïc Damien
bf6e06060b
stm32: avoid useless endian conversion in rng
2023-10-02 17:20:58 +02:00
Dario Nieuwenhuis
eb12114345
Remove impl_trait_projections.
2023-10-02 14:00:49 +02:00
JuliDi
923f1851ee
remove debug logging in build.rs
2023-10-02 09:36:11 +02:00
JuliDi
bd267a6479
move stm32h7 specific import
2023-10-02 09:34:59 +02:00