stm32/rcc: unify f2 into f4/f7.

stm32/rcc: unify l0l1 and l4l5.

.github/ci/build-stable.sh

@@ -8,6 +8,10 @@ export RUSTUP_HOME=/ci/cache/rustup
 export CARGO_HOME=/ci/cache/cargo
 export CARGO_TARGET_DIR=/ci/cache/target
 
+# needed for "dumb HTTP" transport support
+# used when pointing stm32-metapac to a CI-built one.
+export CARGO_NET_GIT_FETCH_WITH_CLI=true
+
 hashtime restore /ci/cache/filetime.json || true
 hashtime save /ci/cache/filetime.json
 

.github/ci/build.sh

@@ -14,6 +14,10 @@ if [ -f /ci/secrets/teleprobe-token.txt ]; then
     export TELEPROBE_CACHE=/ci/cache/teleprobe_cache.json
 fi
 
+# needed for "dumb HTTP" transport support
+# used when pointing stm32-metapac to a CI-built one.
+export CARGO_NET_GIT_FETCH_WITH_CLI=true
+
 hashtime restore /ci/cache/filetime.json || true
 hashtime save /ci/cache/filetime.json
 

.github/ci/doc.sh

@@ -49,8 +49,7 @@ kubectl cp webroot/static $POD:/data
 # build and upload stm32 last
 # so that it doesn't prevent other crates from getting docs updates when it breaks.
 
-# temporarily disabled because it's bringing CI down.
+rm -rf webroot
-#rm -rf webroot
+docserver-builder -i ./embassy-stm32 -o webroot/crates/embassy-stm32/git.zup
-#docserver-builder -i ./embassy-stm32 -o webroot/crates/embassy-stm32/git.zup
+POD=$(kubectl -n embassy get po -l app=docserver -o jsonpath={.items[0].metadata.name})
-#POD=$(kubectl -n embassy get po -l app=docserver -o jsonpath={.items[0].metadata.name})
+kubectl cp webroot/crates $POD:/data
-#kubectl cp webroot/crates $POD:/data

.github/ci/test.sh

@@ -8,6 +8,10 @@ export RUSTUP_HOME=/ci/cache/rustup
 export CARGO_HOME=/ci/cache/cargo
 export CARGO_TARGET_DIR=/ci/cache/target
 
+# needed for "dumb HTTP" transport support
+# used when pointing stm32-metapac to a CI-built one.
+export CARGO_NET_GIT_FETCH_WITH_CLI=true
+
 hashtime restore /ci/cache/filetime.json || true
 hashtime save /ci/cache/filetime.json
 

README.md

@@ -62,9 +62,9 @@ async fn blink(pin: AnyPin) {
     loop {
         // Timekeeping is globally available, no need to mess with hardware timers.
         led.set_high();
-        Timer::after(Duration::from_millis(150)).await;
+        Timer::after_millis(150).await;
         led.set_low();
-        Timer::after(Duration::from_millis(150)).await;
+        Timer::after_millis(150).await;
     }
 }
 

ci.sh

@@ -1,9 +1,12 @@
 #!/bin/bash
 
-set -euo pipefail
+set -eo pipefail
 
 export RUSTFLAGS=-Dwarnings
 export DEFMT_LOG=trace,embassy_hal_internal=debug,embassy_net_esp_hosted=debug,cyw43=info,cyw43_pio=info,smoltcp=info
+if [[ -z "${CARGO_TARGET_DIR}" ]]; then
+    export CARGO_TARGET_DIR=target_ci
+fi
 
 TARGET=$(rustc -vV | sed -n 's|host: ||p')
 
@@ -36,7 +39,7 @@ cargo batch  \
     --- build --release --manifest-path embassy-time/Cargo.toml --target thumbv6m-none-eabi --features nightly,defmt,defmt-timestamp-uptime,tick-hz-32_768,generic-queue-8 \
     --- build --release --manifest-path embassy-net/Cargo.toml --target thumbv7em-none-eabi --features defmt,tcp,udp,dns,proto-ipv4,medium-ethernet \
     --- build --release --manifest-path embassy-net/Cargo.toml --target thumbv7em-none-eabi --features defmt,tcp,udp,dns,dhcpv4,medium-ethernet \
-    --- build --release --manifest-path embassy-net/Cargo.toml --target thumbv7em-none-eabi --features defmt,tcp,udp,dns,dhcpv4,medium-ethernet,nightly \
+    --- build --release --manifest-path embassy-net/Cargo.toml --target thumbv7em-none-eabi --features defmt,tcp,udp,dns,dhcpv4,medium-ethernet,nightly,dhcpv4-hostname \
     --- build --release --manifest-path embassy-net/Cargo.toml --target thumbv7em-none-eabi --features defmt,tcp,udp,dns,proto-ipv6,medium-ethernet \
     --- build --release --manifest-path embassy-net/Cargo.toml --target thumbv7em-none-eabi --features defmt,tcp,udp,dns,proto-ipv6,medium-ieee802154 \
     --- build --release --manifest-path embassy-net/Cargo.toml --target thumbv7em-none-eabi --features defmt,tcp,udp,dns,proto-ipv6,medium-ethernet,medium-ieee802154 \
@@ -66,46 +69,68 @@ cargo batch  \
     --- build --release --manifest-path embassy-rp/Cargo.toml --target thumbv6m-none-eabi --features nightly \
     --- build --release --manifest-path embassy-rp/Cargo.toml --target thumbv6m-none-eabi --features nightly,intrinsics \
     --- build --release --manifest-path embassy-rp/Cargo.toml --target thumbv6m-none-eabi --features nightly,qspi-as-gpio \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,exti,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,exti,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,exti \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,exti,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,exti,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,exti,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,defmt,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,exti,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,exti,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,exti,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,exti,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,time \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,exti \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt,exti,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze,nightly,defmt \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f410tb,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f401ve,defmt,exti,time-driver-any,unstable-traits \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f411ce,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f405zg,defmt,exti,time-driver-any,unstable-traits \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f413vh,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f407zg,defmt,exti,time-driver-any,unstable-traits \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f429zi,log,exti,time-driver-any,unstable-traits,embedded-sdmmc \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f401ve,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f730i8,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f405zg,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32h755zi-cm7,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f407zg,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32h7b3ai,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f410tb,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32l476vg,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f411ce,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32l422cb,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f412zg,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32wb15cc,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f413vh,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features nightly,stm32l072cz,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f415zg,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features nightly,stm32l041f6,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f417zg,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32l151cb-a,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f423zh,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f398ve,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f427zi,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f378cc,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f429zi,log,exti,time-driver-any,unstable-traits,embedded-sdmmc,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features nightly,stm32g0c1ve,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f437zi,log,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f217zg,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f439zi,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features nightly,stm32l552ze,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f446ze,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features nightly,stm32wl54jc-cm0p,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f469zi,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32wle5jb,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f479zi,defmt,exti,time-driver-any,unstable-traits,embedded-sdmmc,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32g474pe,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32f730i8,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f107vc,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32h753zi,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f103re,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32h735zg,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f100c4,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32h755zi-cm7,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32h503rb,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32h7b3ai,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32h562ag,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32l476vg,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32l422cb,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32wb15cc,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features nightly,stm32l072cz,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features nightly,stm32l041f6,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features nightly,stm32l073cz,defmt,exti,time-driver-any,unstable-traits,low-power,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32l151cb-a,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f398ve,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f378cc,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features nightly,stm32g0c1ve,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f217zg,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features nightly,stm32l552ze,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features nightly,stm32wl54jc-cm0p,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32wle5jb,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32g474pe,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f107vc,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f103re,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f100c4,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32h503rb,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32h562ag,defmt,exti,time-driver-any,unstable-traits,time \
     --- build --release --manifest-path cyw43/Cargo.toml --target thumbv6m-none-eabi --features ''\
     --- build --release --manifest-path cyw43/Cargo.toml --target thumbv6m-none-eabi --features 'log' \
     --- build --release --manifest-path cyw43/Cargo.toml --target thumbv6m-none-eabi --features 'defmt' \
@@ -144,6 +169,7 @@ cargo batch  \
     --- build --release --manifest-path examples/stm32l5/Cargo.toml --target thumbv8m.main-none-eabihf --out-dir out/examples/stm32l5 \
     --- build --release --manifest-path examples/stm32u5/Cargo.toml --target thumbv8m.main-none-eabihf --out-dir out/examples/stm32u5 \
     --- build --release --manifest-path examples/stm32wb/Cargo.toml --target thumbv7em-none-eabihf --out-dir out/examples/stm32wb \
+    --- build --release --manifest-path examples/stm32wba/Cargo.toml --target thumbv8m.main-none-eabihf --out-dir out/examples/stm32wba \
     --- build --release --manifest-path examples/stm32wl/Cargo.toml --target thumbv7em-none-eabihf --out-dir out/examples/stm32wl \
     --- build --release --manifest-path examples/boot/application/nrf/Cargo.toml --target thumbv7em-none-eabi --features embassy-nrf/nrf52840,skip-include --out-dir out/examples/boot/nrf52840  \
     --- build --release --manifest-path examples/boot/application/nrf/Cargo.toml --target thumbv8m.main-none-eabihf --features embassy-nrf/nrf9160-ns,skip-include --out-dir out/examples/boot/nrf9160 \
@@ -166,20 +192,42 @@ cargo batch  \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32g071rb --out-dir out/tests/stm32g071rb \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32c031c6 --out-dir out/tests/stm32c031c6 \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h755zi --out-dir out/tests/stm32h755zi \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h753zi --out-dir out/tests/stm32h753zi \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h7a3zi --out-dir out/tests/stm32h7a3zi \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wb55rg --out-dir out/tests/stm32wb55rg \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h563zi --out-dir out/tests/stm32h563zi \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32u585ai --out-dir out/tests/stm32u585ai \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32u5a5zj --out-dir out/tests/stm32u5a5zj \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wba52cg --out-dir out/tests/stm32wba52cg \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32l073rz --out-dir out/tests/stm32l073rz \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32l152re --out-dir out/tests/stm32l152re \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l4a6zg --out-dir out/tests/stm32l4a6zg \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l4r5zi --out-dir out/tests/stm32l4r5zi \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features stm32l552ze --out-dir out/tests/stm32l552ze \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f767zi --out-dir out/tests/stm32f767zi \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32f207zg --out-dir out/tests/stm32f207zg \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f303ze --out-dir out/tests/stm32f303ze \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l496zg --out-dir out/tests/stm32l496zg \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wl55jc --out-dir out/tests/stm32wl55jc \
     --- build --release --manifest-path tests/rp/Cargo.toml --target thumbv6m-none-eabi --out-dir out/tests/rpi-pico \
     --- build --release --manifest-path tests/nrf/Cargo.toml --target thumbv7em-none-eabi --out-dir out/tests/nrf52840-dk \
     --- build --release --manifest-path tests/riscv32/Cargo.toml --target riscv32imac-unknown-none-elf \
     $BUILD_EXTRA
 
 
+rm out/tests/stm32wb55rg/wpan_mac
+rm out/tests/stm32wb55rg/wpan_ble
+
+
+# unstable, I think it's running out of RAM?
+rm out/tests/stm32f207zg/eth
+
+# doesn't work, gives "noise error", no idea why. usart_dma does pass.
+rm out/tests/stm32u5a5zj/usart
+
 if [[ -z "${TELEPROBE_TOKEN-}" ]]; then
     echo No teleprobe token found, skipping running HIL tests
     exit
 fi
 
-rm out/tests/stm32wb55rg/wpan_ble
-
 teleprobe client run -r out/tests

ci_stable.sh

@@ -40,33 +40,38 @@ cargo batch  \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32u585zi,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wb55vy,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wl55cc-cm4,defmt,exti,time-driver-any,unstable-traits \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l4r9zi,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32g473cc,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f303vc,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32g491re,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f411ce,defmt,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32u585zi,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f411ce,defmt,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wb55vy,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f429zi,log,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wl55cc-cm4,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f429zi,log,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l4r9zi,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h755zi-cm7,defmt,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f303vc,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h755zi-cm7,defmt,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f411ce,defmt,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l476vg,defmt,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f411ce,defmt,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l476vg,defmt,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f429zi,log,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32l072cz,defmt,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f429zi,log,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32l072cz,defmt,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h755zi-cm7,defmt,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32l151cb-a,defmt,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h755zi-cm7,defmt,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32l151cb-a,defmt,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l476vg,defmt,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f410tb,defmt,exti,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l476vg,defmt,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f410tb,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32l072cz,defmt,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f429zi,log,exti,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32l072cz,defmt,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f429zi,log,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32l151cb-a,defmt,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h755zi-cm7,defmt,exti,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32l151cb-a,defmt,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h755zi-cm7,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f410tb,defmt,exti,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l476vg,defmt,exti,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f410tb,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l476vg,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f429zi,log,exti,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32l072cz,defmt,exti,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f429zi,log,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32l072cz,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h755zi-cm7,defmt,exti,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32l151cb-a,defmt,exti,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h755zi-cm7,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32l151cb-a,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l476vg,defmt,exti,time-driver-any,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32f217zg,defmt,exti,time-driver-any \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l476vg,defmt,exti,time-driver-any,unstable-traits,time \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32f217zg,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32l072cz,defmt,exti,time-driver-any,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32l072cz,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32l151cb-a,defmt,exti,time-driver-any,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32l151cb-a,defmt,exti,time-driver-any,unstable-traits,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32f217zg,defmt,exti,time-driver-any,time \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32f217zg,defmt,exti,time-driver-any,unstable-traits,time \
     --- build --release --manifest-path examples/nrf52840/Cargo.toml --target thumbv7em-none-eabi --no-default-features --out-dir out/examples/nrf52840 --bin raw_spawn \
     --- build --release --manifest-path examples/stm32l0/Cargo.toml --target thumbv6m-none-eabi --no-default-features --out-dir out/examples/stm32l0 --bin raw_spawn \

cyw43-pio/src/lib.rs

@@ -1,6 +1,6 @@
 #![no_std]
-#![allow(incomplete_features)]
 #![feature(async_fn_in_trait)]
+#![allow(stable_features, unknown_lints, async_fn_in_trait)]
 
 use core::slice;
 

cyw43/Cargo.toml

@@ -11,11 +11,10 @@ log = ["dep:log"]
 firmware-logs = []
 
 [dependencies]
-embassy-time = { version = "0.1.3", path = "../embassy-time"}
+embassy-time = { version = "0.1.5", path = "../embassy-time"}
-embassy-sync = { version = "0.3.0", path = "../embassy-sync"}
+embassy-sync = { version = "0.4.0", path = "../embassy-sync"}
 embassy-futures = { version = "0.1.0", path = "../embassy-futures"}
-embassy-net-driver-channel = { version = "0.1.0", path = "../embassy-net-driver-channel"}
+embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel"}
-atomic-polyfill = "0.1.5"
 
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4.17", optional = true }

cyw43/src/bus.rs

@@ -1,5 +1,5 @@
 use embassy_futures::yield_now;
-use embassy_time::{Duration, Timer};
+use embassy_time::Timer;
 use embedded_hal_1::digital::OutputPin;
 use futures::FutureExt;
 
@@ -51,9 +51,9 @@ where
     pub async fn init(&mut self) {
         // Reset
         self.pwr.set_low().unwrap();
-        Timer::after(Duration::from_millis(20)).await;
+        Timer::after_millis(20).await;
         self.pwr.set_high().unwrap();
-        Timer::after(Duration::from_millis(250)).await;
+        Timer::after_millis(250).await;
 
         while self
             .read32_swapped(REG_BUS_TEST_RO)

cyw43/src/control.rs

@@ -1,10 +1,9 @@
 use core::cmp::{max, min};
 
-use ch::driver::LinkState;
 use embassy_net_driver_channel as ch;
-use embassy_time::{Duration, Timer};
+use embassy_net_driver_channel::driver::{HardwareAddress, LinkState};
+use embassy_time::Timer;
 
-pub use crate::bus::SpiBusCyw43;
 use crate::consts::*;
 use crate::events::{Event, EventSubscriber, Events};
 use crate::fmt::Bytes;
@@ -87,22 +86,22 @@ impl<'a> Control<'a> {
         self.set_iovar("country", &country_info.to_bytes()).await;
 
         // set country takes some time, next ioctls fail if we don't wait.
-        Timer::after(Duration::from_millis(100)).await;
+        Timer::after_millis(100).await;
 
         // Set antenna to chip antenna
         self.ioctl_set_u32(IOCTL_CMD_ANTDIV, 0, 0).await;
 
         self.set_iovar_u32("bus:txglom", 0).await;
-        Timer::after(Duration::from_millis(100)).await;
+        Timer::after_millis(100).await;
         //self.set_iovar_u32("apsta", 1).await; // this crashes, also we already did it before...??
-        //Timer::after(Duration::from_millis(100)).await;
+        //Timer::after_millis(100).await;
         self.set_iovar_u32("ampdu_ba_wsize", 8).await;
-        Timer::after(Duration::from_millis(100)).await;
+        Timer::after_millis(100).await;
         self.set_iovar_u32("ampdu_mpdu", 4).await;
-        Timer::after(Duration::from_millis(100)).await;
+        Timer::after_millis(100).await;
         //self.set_iovar_u32("ampdu_rx_factor", 0).await; // this crashes
 
-        //Timer::after(Duration::from_millis(100)).await;
+        //Timer::after_millis(100).await;
 
         // evts
         let mut evts = EventMask {
@@ -121,19 +120,19 @@ impl<'a> Control<'a> {
 
         self.set_iovar("bsscfg:event_msgs", &evts.to_bytes()).await;
 
-        Timer::after(Duration::from_millis(100)).await;
+        Timer::after_millis(100).await;
 
         // set wifi up
         self.up().await;
 
-        Timer::after(Duration::from_millis(100)).await;
+        Timer::after_millis(100).await;
 
         self.ioctl_set_u32(110, 0, 1).await; // SET_GMODE = auto
         self.ioctl_set_u32(142, 0, 0).await; // SET_BAND = any
 
-        Timer::after(Duration::from_millis(100)).await;
+        Timer::after_millis(100).await;
 
-        self.state_ch.set_ethernet_address(mac_addr);
+        self.state_ch.set_hardware_address(HardwareAddress::Ethernet(mac_addr));
 
         debug!("INIT DONE");
     }
@@ -185,7 +184,7 @@ impl<'a> Control<'a> {
         self.set_iovar_u32x2("bsscfg:sup_wpa2_eapver", 0, 0xFFFF_FFFF).await;
         self.set_iovar_u32x2("bsscfg:sup_wpa_tmo", 0, 2500).await;
 
-        Timer::after(Duration::from_millis(100)).await;
+        Timer::after_millis(100).await;
 
         let mut pfi = PassphraseInfo {
             len: passphrase.len() as _,
@@ -297,7 +296,7 @@ impl<'a> Control<'a> {
         if security != Security::OPEN {
             self.set_iovar_u32x2("bsscfg:wpa_auth", 0, 0x0084).await; // wpa_auth = WPA2_AUTH_PSK | WPA_AUTH_PSK
 
-            Timer::after(Duration::from_millis(100)).await;
+            Timer::after_millis(100).await;
 
             // Set passphrase
             let mut pfi = PassphraseInfo {

cyw43/src/lib.rs

@@ -1,7 +1,7 @@
 #![no_std]
 #![no_main]
-#![allow(incomplete_features)]
 #![feature(async_fn_in_trait, type_alias_impl_trait, concat_bytes)]
+#![allow(stable_features, unknown_lints, async_fn_in_trait)]
 #![deny(unused_must_use)]
 
 // This mod MUST go first, so that the others see its macros.

cyw43/src/runner.rs

@@ -555,14 +555,14 @@ where
 
         self.bus.bp_write8(base + AI_RESETCTRL_OFFSET, 0).await;
 
-        Timer::after(Duration::from_millis(1)).await;
+        Timer::after_millis(1).await;
 
         self.bus
             .bp_write8(base + AI_IOCTRL_OFFSET, AI_IOCTRL_BIT_CLOCK_EN)
             .await;
         let _ = self.bus.bp_read8(base + AI_IOCTRL_OFFSET).await;
 
-        Timer::after(Duration::from_millis(1)).await;
+        Timer::after_millis(1).await;
     }
 
     async fn core_is_up(&mut self, core: Core) -> bool {

docs/modules/ROOT/examples/basic/Cargo.toml

@@ -7,7 +7,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-executor = { version = "0.3.0", path = "../../../../../embassy-executor", features = ["defmt", "nightly", "integrated-timers", "arch-cortex-m", "executor-thread"] }
-embassy-time = { version = "0.1.0", path = "../../../../../embassy-time", features = ["defmt", "nightly"] }
+embassy-time = { version = "0.1.4", path = "../../../../../embassy-time", features = ["defmt", "nightly"] }
 embassy-nrf = { version = "0.1.0", path = "../../../../../embassy-nrf", features = ["defmt", "nrf52840", "time-driver-rtc1", "gpiote", "nightly"] }
 
 defmt = "0.3"

docs/modules/ROOT/nav.adoc

@@ -1,6 +1,6 @@
 * xref:getting_started.adoc[Getting started]
 ** xref:basic_application.adoc[Basic application]
-** xref:layer_by_layer.adoc[Layer by Layer]
+* xref:layer_by_layer.adoc[Bare metal to async]
 * xref:runtime.adoc[Executor]
 * xref:hal.adoc[HAL]
 ** xref:nrf.adoc[nRF]
@@ -8,3 +8,5 @@
 * xref:bootloader.adoc[Bootloader]
 
 * xref:examples.adoc[Examples]
+* xref:developer.adoc[Developer]
+** xref:developer_stm32.adoc[Developer: STM32]

docs/modules/ROOT/pages/basic_application.adoc

@@ -48,7 +48,7 @@ The `Spawner` is the way the main application spawns other tasks. The `Periphera
 include::example$basic/src/main.rs[lines="22..-1"]
 ----
 
-What happens when the `blinker` task has been spawned and main returns? Well, the main entry point is actually just like any other task, except that you can only have one and it takes some specific type arguments. The magic lies within the `#[embassy::main]` macro. The macro does the following:
+What happens when the `blinker` task has been spawned and main returns? Well, the main entry point is actually just like any other task, except that you can only have one and it takes some specific type arguments. The magic lies within the `#[embassy_executor::main]` macro. The macro does the following:
 
 . Creates an Embassy Executor
 . Initializes the microcontroller HAL to get the `Peripherals`

docs/modules/ROOT/pages/developer.adoc

@@ -0,0 +1 @@
+= Developer Documentation

docs/modules/ROOT/pages/developer_stm32.adoc

@@ -0,0 +1,79 @@
+= Developer Documentation: STM32
+
+== Understanding metapac
+
+When a project that imports `embassy-stm32` is compiled, that project selects the feature corresponding to the chip that project is using. Based on that feature, `embassy-stm32` selects supported link:https://anysilicon.com/ip-intellectual-property-core-semiconductors/[IP] for the chip, and enables the corresponding HAL implementations. But how does `embassy-stm32` know what IP the chip contains, out of the hundreds of chips that we support? It's a long story that starts with `stm32-data-sources`.
+
+== `stm32-data-sources`
+
+link:https://github.com/embassy-rs/stm32-data-sources[`stm32-data-sources`] is as mostly barren repository. It has no README, no documentation, and few watchers. But it's the core of what makes `embassy-stm32` possible. The data for every chip that we support is taken in part from a corresponding XML file like link:https://github.com/embassy-rs/stm32-data-sources/blob/b8b85202e22a954d6c59d4a43d9795d34cff05cf/cubedb/mcu/STM32F051K4Ux.xml[`STM32F051K4Ux.xml`]. In that file, you'll see lines like the following:
+
+[source,xml]
+----
+    <IP InstanceName="I2C1" Name="I2C" Version="i2c2_v1_1_Cube"/>
+    <!-- snip  -->
+    <IP ConfigFile="TIM-STM32F0xx" InstanceName="TIM1" Name="TIM1_8F0" Version="gptimer2_v2_x_Cube"/>
+----
+
+These lines indicate that this chip has an i2c, and that it's version is "v1_1". It also indicates that it has a general purpose timer that with a version of "v2_x". From this data, it's possible to determine which implementations should be included in `embassy-stm32`. But actually doing that is another matter.
+
+
+== `stm32-data`
+
+While all users of this project are familiar with `embassy-stm32`, fewer are familiar with the project that powers it: `stm32-data`. This project doesn't just aim to generate data for `embassy-stm32`, but for machine consumption in general. To acheive this, information from multiple files from the `stm32-data-sources` project are combined and parsed to assign register block implementations for each supported IP. The core of this matching resides in `chips.rs`:
+
+[source,rust]
+----
+    (".*:I2C:i2c2_v1_1", ("i2c", "v2", "I2C")),
+    // snip
+    (r".*TIM\d.*:gptimer.*", ("timer", "v1", "TIM_GP16")),
+----
+
+In this case, the i2c version corresponds to our "v2" and the general purpose timer version corresponds to our "v1". Therefore, the `i2c_v2.yaml` and `timer_v1.yaml` register block implementations are assigned to those IP, respectively. The result is that these lines arr generated in `STM32F051K4.json`:
+
+[source,json]
+----
+    {
+        "name": "I2C1",
+        "address": 1073763328,
+        "registers": {
+            "kind": "i2c",
+            "version": "v2",
+            "block": "I2C"
+        },
+        // snip
+    }
+    // snip
+    {
+        "name": "TIM1",
+        "address": 1073818624,
+        "registers": {
+            "kind": "timer",
+            "version": "v1",
+            "block": "TIM_ADV"
+        },
+        // snip
+    }
+----
+
+In addition to register blocks, data for pin and RCC mapping is also generated and consumed by `embassy-stm32`. `stm32-metapac-gen` is used to package and publish the data as a crate.
+
+
+== `embassy-stm32`
+
+In the `lib.rs` file located in the root of `embassy-stm32`, you'll see this line:
+
+[source,rust]
+----
+#[cfg(i2c)]
+pub mod i2c;
+----
+
+And in the `mod.rs` of the i2c mod, you'll see this:
+
+[source,rust]
+----
+#[cfg_attr(i2c_v2, path = "v2.rs")]
+----
+
+Because i2c is supported for STM32F051K4 and its version corresponds to our "v2", the `i2c` and `i2c_v2`, configuration directives will be present, and `embassy-stm32` will include these files, respectively. This and other configuration directives and tables are generated from the data for chip, allowing `embassy-stm32` to expressively and clearly adapt logic and implementations to what is required for each chip. Compared to other projects across the embedded ecosystem, `embassy-stm32` is the only project that can re-use code across the entire stm32 lineup and remove difficult-to-implement unsafe logic to the HAL.

docs/modules/ROOT/pages/getting_started.adoc

@@ -3,7 +3,7 @@
 So you want to try Embassy, great! To get started, there are a few tools you need to install:
 
 * link:https://rustup.rs/[rustup] - the Rust toolchain is needed to compile Rust code.
-* link:https://crates.io/crates/probe-run[probe-run] - to flash the firmware on your device. If you already have other tools like `OpenOCD` setup, you can use that as well.
+* link:https://crates.io/crates/probe-rs[probe-rs] - to flash the firmware on your device. If you already have other tools like `OpenOCD` setup, you can use that as well.
 
 If you don't have any supported board, don't worry: you can also run embassy on your PC using the `std` examples.
 
@@ -30,6 +30,10 @@ Embassy supports many microcontroller families, but the easiest ways to get star
 
 * link:https://www.raspberrypi.com/products/raspberry-pi-pico/[Raspberry Pi Pico]
 
+=== ESP32
+
+* link:https://github.com/esp-rs/esp-rust-board[ESP32C3]
+
 == Running an example
 
 First you need to clone the [github repository];
@@ -38,7 +42,6 @@ First you need to clone the [github repository];
 ----
 git clone https://github.com/embassy-rs/embassy.git
 cd embassy
-git submodule update --init
 ----
 
 You can run an example by opening a terminal and entering the following commands:

docs/modules/ROOT/pages/hal.adoc

@@ -7,4 +7,6 @@ Embassy provides HALs for several microcontroller families:
 * `embassy-rp` for the Raspberry Pi RP2040 microcontrollers
 
 These HALs implement async/await functionality for most peripherals while also implementing the
-async traits in `embedded-hal-async`. You can also use these HALs with another executor.
+async traits in `embedded-hal` and `embedded-hal-async`. You can also use these HALs with another executor.
+
+For the ESP32 series, there is an link:https://github.com/esp-rs/esp-hal[esp-hal] which you can use.

docs/modules/ROOT/pages/index.adoc

@@ -4,14 +4,9 @@ Embassy is a project to make async/await a first-class option for embedded devel
 
 == What is async?
 
-Software written without async may block on I/O operations. In an std environment, such as a PC, software can handle this either by using threads or non-blocking operations.
+When handling I/O, software must call functions that block program execution until the I/O operation completes. When running inside of an OS such as Linux, such functions generally transfer control to the kernel so that another task, known as a thread, can be executed if available, or the CPU can be put to sleep until another such task is ready to perform more work. Because an OS cannot presume that threads will behave cooperatively, threads are relatively resource-intensive, and may be forcibly interrupted they do not transfer control back to the kernel within an allotted time. But if tasks could be presumed to behave cooperatively, or at least not maliciously, it would be possible to create tasks that appear to be almost free when compared to a traditional OS thread. In Rust, these lightweight tasks, known as 'coroutines' or 'goroutines' in other languages, are implemented with async.
 
-With threads, one thread blocks on an I/O operation, another is able to take its place. However, even on a PC, threads are relatively heavy, and therefore some programming languages, such as Go, have implemented a concept called coroutines or 'goroutines' that are much lighter and less-intensive than threads.
+Async-await works by transforming each async function into an object called a future. When a future blocks on I/O the future yields, and the scheduler, called an executor, can select a different future to execute. Compared to alternatives such as an RTOS, async can yield better performance and lower power consumption because the executor doesn't have to guess when a future is ready to execute. However, program size may be higher than other alternatives, which may be a problem for certain space-constrained devices with very low memory. On the devices Embassy supports, such as stm32 and nrf, memory is generally large enough to accommodate the modestly-increased program size.
-
-The other way to handle blocking I/O operations is to support polling the state of the underlying peripherals to check whether it is available to perform the requested operation. In programming languages without builtin async support,
-this requires building a complex loop checking for events.
-
-In Rust, non-blocking operations can be implemented using async-await. Async-await works by transforming each async function into an object called a future. When a future blocks on I/O the future yields, and the scheduler, called an executor, can select a different future to execute. Compared to alternatives such as an RTOS, async can yield better performance and lower power consumption because the executor doesn't have to guess when a future is ready to execute. However, program size may be higher than other alternatives, which may be a problem for certain space-constrained devices with very low memory. On the devices Embassy supports, such as stm32 and nrf, memory is generally large enough to accommodate the modestly-increased program size.
 
 == What is Embassy?
 
@@ -22,13 +17,26 @@ The Embassy project consists of several crates that you can use together or inde
 * **Hardware Abstraction Layers** - HALs implement safe, idiomatic Rust APIs to use the hardware capabilities, so raw register manipulation is not needed. The Embassy project maintains HALs for select hardware, but you can still use HALs from other projects with Embassy.
 ** link:https://docs.embassy.dev/embassy-stm32/[embassy-stm32], for all STM32 microcontroller families.
 ** link:https://docs.embassy.dev/embassy-nrf/[embassy-nrf], for the Nordic Semiconductor nRF52, nRF53, nRF91 series.
+** link:https://docs.embassy.dev/embassy-rp/[embassy-rp], for the Raspberry Pi RP2040 microcontroller.
+** link:https://github.com/esp-rs[esp-rs], for the Espressif Systems ESP32 series of chips.
++
+NOTE: A common question is if one can use the Embassy HALs standalone. Yes, it is possible! There are no dependency on the executor within the HALs. You can even use them without async,
+as they implement both the link:https://github.com/rust-embedded/embedded-hal[Embedded HAL] blocking and async traits.
 
-* **Networking** - The link:https://docs.embassy.dev/embassy-net/[embassy-net] network stack implements extensive networking functionality, including Ethernet, IP, TCP, UDP, ICMP and DHCP. Async drastically simplifies managing timeouts and serving multiple connections concurrently.
+* **Networking** - The link:https://docs.embassy.dev/embassy-net/[embassy-net] network stack implements extensive networking functionality, including Ethernet, IP, TCP, UDP, ICMP and DHCP. Async drastically simplifies managing timeouts and serving multiple connections concurrently. Several drivers for WiFi and Ethernet chips can be found.
 
 * **Bluetooth** - The link:https://github.com/embassy-rs/nrf-softdevice[nrf-softdevice] crate provides Bluetooth Low Energy 4.x and 5.x support for nRF52 microcontrollers.
 
-* **LoRa** - link:https://docs.embassy.dev/embassy-lora/[embassy-lora] supports LoRa networking on STM32WL wireless microcontrollers and Semtech SX127x transceivers.
+* **LoRa** - link:https://github.com/embassy-rs/lora-phy[lora-phy] and link:https://docs.embassy.dev/embassy-lora/[embassy-lora] supports LoRa networking on a wide range of LoRa radios, fully integrated with a Rust link:https://github.com/ivajloip/rust-lorawan[LoRaWAN] implementation.
 
 * **USB** - link:https://docs.embassy.dev/embassy-usb/[embassy-usb] implements a device-side USB stack. Implementations for common classes such as USB serial (CDC ACM) and USB HID are available, and a rich builder API allows building your own.
 
 * **Bootloader and DFU** - link:https://github.com/embassy-rs/embassy/tree/master/embassy-boot[embassy-boot] is a lightweight bootloader supporting firmware application upgrades in a power-fail-safe way, with trial boots and rollbacks.
+
+== Resources
+
+For more reading material on async Rust and Embassy:
+
+* link:https://tweedegolf.nl/en/blog/65/async-rust-vs-rtos-showdown[Comparsion of FreeRTOS and Embassy]
+* link:https://dev.to/apollolabsbin/series/20707[Tutorials]
+* link:https://blog.drogue.io/firmware-updates-part-1/[Firmware Updates with Embassy]

docs/modules/ROOT/pages/layer_by_layer.adoc

@@ -1,4 +1,4 @@
-= Embassy layer by layer
+= From bare metal to async Rust
 
 If you're new to Embassy, it can be overwhelming to grasp all the terminology and concepts. This guide aims to clarify the different layers in Embassy, which problem each layer solves for the application writer.
 
@@ -8,8 +8,7 @@ The application we'll write is a simple 'push button, blink led' application, wh
 
 == PAC version
 
-The PAC is the lowest API for accessing peripherals and registers, if you don't count reading/writing directly to memory addresses. It provides distinct types
+The PAC is the lowest API for accessing peripherals and registers, if you don't count reading/writing directly to memory addresses. It provides distinct types to make accessing peripheral registers easier, but it does not prevent you from writing unsafe code.
-to make accessing peripheral registers easier, but it does not prevent you from writing unsafe code.
 
 Writing an application using the PAC directly is therefore not recommended, but if the functionality you want to use is not exposed in the upper layers, that's what you need to use.
 

docs/modules/ROOT/pages/nrf.adoc

@@ -8,7 +8,7 @@ The nRF timer driver operates at 32768 Hz by default.
 
 == Peripherals
 
-The following peripherals have a HAL implementation at present:
+The following peripherals have a HAL implementation at present
 
 * PWM
 * SPIM
@@ -23,3 +23,7 @@ The following peripherals have a HAL implementation at present:
 * UARTE
 * TWIM
 * SAADC
+
+== Bluetooth
+
+For bluetooth, you can use the link:https://github.com/embassy-rs/nrf-softdevice[nrf-softdevice] crate.

docs/modules/ROOT/pages/runtime.adoc

@@ -6,11 +6,11 @@ The Embassy executor is an async/await executor designed for embedded usage alon
 
 * No `alloc`, no heap needed. Task are statically allocated.
 * No "fixed capacity" data structures, executor works with 1 or 1000 tasks without needing config/tuning.
-* Integrated timer queue: sleeping is easy, just do `Timer::after(Duration::from_secs(1)).await;`.
+* Integrated timer queue: sleeping is easy, just do `Timer::after_secs(1).await;`.
 * No busy-loop polling: CPU sleeps when there's no work to do, using interrupts or `WFE/SEV`.
 * Efficient polling: a wake will only poll the woken task, not all of them.
 * Fair: a task can't monopolize CPU time even if it's constantly being woken. All other tasks get a chance to run before a given task gets polled for the second time.
-* Creating multiple executor instances is supported, to run tasks with multiple priority levels. This allows higher-priority tasks to preempt lower-priority tasks.
+* Creating multiple executor instances is supported, to run tasks at different priority levels. This allows higher-priority tasks to preempt lower-priority tasks.
 
 == Executor
 

embassy-boot/boot/Cargo.toml

@@ -28,7 +28,7 @@ digest = "0.10"
 log = { version = "0.4", optional = true  }
 ed25519-dalek = { version = "1.0.1", default_features = false, features = ["u32_backend"], optional = true }
 embassy-embedded-hal = { version = "0.1.0", path = "../../embassy-embedded-hal" }
-embassy-sync = { version = "0.3.0", path = "../../embassy-sync" }
+embassy-sync = { version = "0.4.0", path = "../../embassy-sync" }
 embedded-storage = "0.3.0"
 embedded-storage-async = { version = "0.4.0", optional = true }
 salty = { git = "https://github.com/ycrypto/salty.git", rev = "a9f17911a5024698406b75c0fac56ab5ccf6a8c7", optional = true }

embassy-boot/boot/src/lib.rs

@@ -1,4 +1,5 @@
 #![cfg_attr(feature = "nightly", feature(async_fn_in_trait))]
+#![cfg_attr(feature = "nightly", allow(stable_features, unknown_lints, async_fn_in_trait))]
 #![no_std]
 #![warn(missing_docs)]
 #![doc = include_str!("../README.md")]

embassy-boot/nrf/Cargo.toml

@@ -16,7 +16,7 @@ target = "thumbv7em-none-eabi"
 [dependencies]
 defmt = { version = "0.3", optional = true }
 
-embassy-sync = { path = "../../embassy-sync" }
+embassy-sync = { version = "0.4.0", path = "../../embassy-sync" }
 embassy-nrf = { path = "../../embassy-nrf" }
 embassy-boot = { path = "../boot", default-features = false }
 cortex-m = { version = "0.7.6" }

embassy-boot/rp/Cargo.toml

@@ -17,7 +17,7 @@ defmt = { version = "0.3", optional = true }
 defmt-rtt = { version = "0.4", optional = true }
 log = { version = "0.4", optional = true }
 
-embassy-sync = { path = "../../embassy-sync" }
+embassy-sync = { version = "0.4.0", path = "../../embassy-sync" }
 embassy-rp = { path = "../../embassy-rp", default-features = false }
 embassy-boot = { path = "../boot", default-features = false }
 embassy-time = { path = "../../embassy-time" }

embassy-boot/stm32/Cargo.toml

@@ -18,7 +18,7 @@ defmt = { version = "0.3", optional = true }
 defmt-rtt = { version = "0.4", optional = true }
 log = { version = "0.4", optional = true }
 
-embassy-sync = { path = "../../embassy-sync" }
+embassy-sync = { version = "0.4.0", path = "../../embassy-sync" }
 embassy-stm32 = { path = "../../embassy-stm32", default-features = false }
 embassy-boot = { path = "../boot", default-features = false }
 cortex-m = { version = "0.7.6" }

embassy-embedded-hal/Cargo.toml

@@ -20,8 +20,8 @@ default = ["time"]
 
 [dependencies]
 embassy-futures = { version = "0.1.0", path = "../embassy-futures", optional = true }
-embassy-sync = { version = "0.3.0", path = "../embassy-sync" }
+embassy-sync = { version = "0.4.0", path = "../embassy-sync" }
-embassy-time = { version = "0.1.3", path = "../embassy-time", optional = true }
+embassy-time = { version = "0.1.5", path = "../embassy-time", optional = true }
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = [
     "unproven",
 ] }

embassy-embedded-hal/src/flash/partition/mod.rs

@@ -11,7 +11,7 @@ pub use asynch::Partition;
 pub use blocking::BlockingPartition;
 
 /// Partition error
-#[derive(Debug)]
+#[derive(Debug, PartialEq, Eq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum Error<T> {
     /// The requested flash area is outside the partition

embassy-embedded-hal/src/lib.rs

@@ -1,5 +1,6 @@
 #![cfg_attr(not(feature = "std"), no_std)]
 #![cfg_attr(feature = "nightly", feature(async_fn_in_trait, impl_trait_projections, try_blocks))]
+#![cfg_attr(feature = "nightly", allow(stable_features, unknown_lints, async_fn_in_trait))]
 #![warn(missing_docs)]
 
 //! Utilities to use `embedded-hal` traits with Embassy.
@@ -26,6 +27,18 @@ pub trait SetConfig {
     /// The configuration type used by this driver.
     type Config;
 
+    /// The error type that can occur if `set_config` fails.
+    type ConfigError;
+
     /// Set the configuration of the driver.
-    fn set_config(&mut self, config: &Self::Config);
+    fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError>;
+}
+
+/// Get the configuration of a peripheral driver.
+pub trait GetConfig {
+    /// The configuration type used by this driver.
+    type Config;
+
+    /// Get the configuration of the driver.
+    fn get_config(&self) -> Self::Config;
 }

embassy-embedded-hal/src/shared_bus/asynch/i2c.rs

@@ -125,14 +125,14 @@ where
 {
     async fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), I2cDeviceError<BUS::Error>> {
         let mut bus = self.bus.lock().await;
-        bus.set_config(&self.config);
+        bus.set_config(&self.config).map_err(|_| I2cDeviceError::Config)?;
         bus.read(address, buffer).await.map_err(I2cDeviceError::I2c)?;
         Ok(())
     }
 
     async fn write(&mut self, address: u8, bytes: &[u8]) -> Result<(), I2cDeviceError<BUS::Error>> {
         let mut bus = self.bus.lock().await;
-        bus.set_config(&self.config);
+        bus.set_config(&self.config).map_err(|_| I2cDeviceError::Config)?;
         bus.write(address, bytes).await.map_err(I2cDeviceError::I2c)?;
         Ok(())
     }
@@ -144,7 +144,7 @@ where
         rd_buffer: &mut [u8],
     ) -> Result<(), I2cDeviceError<BUS::Error>> {
         let mut bus = self.bus.lock().await;
-        bus.set_config(&self.config);
+        bus.set_config(&self.config).map_err(|_| I2cDeviceError::Config)?;
         bus.write_read(address, wr_buffer, rd_buffer)
             .await
             .map_err(I2cDeviceError::I2c)?;
@@ -153,7 +153,7 @@ where
 
     async fn transaction(&mut self, address: u8, operations: &mut [i2c::Operation<'_>]) -> Result<(), Self::Error> {
         let mut bus = self.bus.lock().await;
-        bus.set_config(&self.config);
+        bus.set_config(&self.config).map_err(|_| I2cDeviceError::Config)?;
         bus.transaction(address, operations)
             .await
             .map_err(I2cDeviceError::I2c)?;

embassy-embedded-hal/src/shared_bus/asynch/spi.rs

@@ -76,9 +76,7 @@ where
                     #[cfg(not(feature = "time"))]
                     Operation::DelayUs(_) => return Err(SpiDeviceError::DelayUsNotSupported),
                     #[cfg(feature = "time")]
-                    Operation::DelayUs(us) => {
+                    Operation::DelayUs(us) => embassy_time::Timer::after_micros(*us as _).await,
-                        embassy_time::Timer::after(embassy_time::Duration::from_micros(*us as _)).await
-                    }
                 }
             }
         };
@@ -130,7 +128,7 @@ where
 {
     async fn transaction(&mut self, operations: &mut [spi::Operation<'_, u8>]) -> Result<(), Self::Error> {
         let mut bus = self.bus.lock().await;
-        bus.set_config(&self.config);
+        bus.set_config(&self.config).map_err(|_| SpiDeviceError::Config)?;
         self.cs.set_low().map_err(SpiDeviceError::Cs)?;
 
         let op_res: Result<(), BUS::Error> = try {
@@ -143,9 +141,7 @@ where
                     #[cfg(not(feature = "time"))]
                     Operation::DelayUs(_) => return Err(SpiDeviceError::DelayUsNotSupported),
                     #[cfg(feature = "time")]
-                    Operation::DelayUs(us) => {
+                    Operation::DelayUs(us) => embassy_time::Timer::after_micros(*us as _).await,
-                        embassy_time::Timer::after(embassy_time::Duration::from_micros(*us as _)).await
-                    }
                 }
             }
         };

embassy-embedded-hal/src/shared_bus/blocking/i2c.rs

@@ -148,7 +148,7 @@ where
     fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Self::Error> {
         self.bus.lock(|bus| {
             let mut bus = bus.borrow_mut();
-            bus.set_config(&self.config);
+            bus.set_config(&self.config).map_err(|_| I2cDeviceError::Config)?;
             bus.read(address, buffer).map_err(I2cDeviceError::I2c)
         })
     }
@@ -156,7 +156,7 @@ where
     fn write(&mut self, address: u8, bytes: &[u8]) -> Result<(), Self::Error> {
         self.bus.lock(|bus| {
             let mut bus = bus.borrow_mut();
-            bus.set_config(&self.config);
+            bus.set_config(&self.config).map_err(|_| I2cDeviceError::Config)?;
             bus.write(address, bytes).map_err(I2cDeviceError::I2c)
         })
     }
@@ -164,7 +164,7 @@ where
     fn write_read(&mut self, address: u8, wr_buffer: &[u8], rd_buffer: &mut [u8]) -> Result<(), Self::Error> {
         self.bus.lock(|bus| {
             let mut bus = bus.borrow_mut();
-            bus.set_config(&self.config);
+            bus.set_config(&self.config).map_err(|_| I2cDeviceError::Config)?;
             bus.write_read(address, wr_buffer, rd_buffer)
                 .map_err(I2cDeviceError::I2c)
         })

embassy-embedded-hal/src/shared_bus/blocking/spi.rs

@@ -163,7 +163,7 @@ where
     fn transaction(&mut self, operations: &mut [Operation<'_, u8>]) -> Result<(), Self::Error> {
         self.bus.lock(|bus| {
             let mut bus = bus.borrow_mut();
-            bus.set_config(&self.config);
+            bus.set_config(&self.config).map_err(|_| SpiDeviceError::Config)?;
             self.cs.set_low().map_err(SpiDeviceError::Cs)?;
 
             let op_res = operations.iter_mut().try_for_each(|op| match op {

embassy-embedded-hal/src/shared_bus/mod.rs

@@ -14,6 +14,8 @@ pub mod blocking;
 pub enum I2cDeviceError<BUS> {
     /// An operation on the inner I2C bus failed.
     I2c(BUS),
+    /// Configuration of the inner I2C bus failed.
+    Config,
 }
 
 impl<BUS> i2c::Error for I2cDeviceError<BUS>
@@ -23,6 +25,7 @@ where
     fn kind(&self) -> i2c::ErrorKind {
         match self {
             Self::I2c(e) => e.kind(),
+            Self::Config => i2c::ErrorKind::Other,
         }
     }
 }
@@ -38,6 +41,8 @@ pub enum SpiDeviceError<BUS, CS> {
     Cs(CS),
     /// DelayUs operations are not supported when the `time` Cargo feature is not enabled.
     DelayUsNotSupported,
+    /// The SPI bus could not be configured.
+    Config,
 }
 
 impl<BUS, CS> spi::Error for SpiDeviceError<BUS, CS>
@@ -50,6 +55,7 @@ where
             Self::Spi(e) => e.kind(),
             Self::Cs(_) => spi::ErrorKind::Other,
             Self::DelayUsNotSupported => spi::ErrorKind::Other,
+            Self::Config => spi::ErrorKind::Other,
         }
     }
 }

embassy-executor/CHANGELOG.md

@@ -5,6 +5,15 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## 0.3.2 - 2023-11-06
+
+- Use `atomic-polyfill` for `riscv32`
+- Removed unused dependencies (static_cell, futures-util)
+
+## 0.3.1 - 2023-11-01
+
+- Fix spurious "Found waker not created by the Embassy executor" error in recent nightlies.
+
 ## 0.3.0 - 2023-08-25
 
 - Replaced Pender. Implementations now must define an extern function called `__pender`.

embassy-executor/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "embassy-executor"
-version = "0.3.0"
+version = "0.3.2"
 edition = "2021"
 license = "MIT OR Apache-2.0"
 description = "async/await executor designed for embedded usage"
@@ -57,12 +57,10 @@ defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }
 rtos-trace = { version = "0.1.2", optional = true }
 
-futures-util = { version = "0.3.17", default-features = false }
 embassy-macros = { version = "0.2.1", path = "../embassy-macros" }
-embassy-time = { version = "0.1.3", path = "../embassy-time", optional = true}
+embassy-time = { version = "0.1.5", path = "../embassy-time", optional = true}
 atomic-polyfill = "1.0.1"
 critical-section = "1.1"
-static_cell = "1.1"
 
 # arch-cortex-m dependencies
 cortex-m = { version = "0.7.6", optional = true }

embassy-executor/README.md

@@ -4,7 +4,7 @@ An async/await executor designed for embedded usage.
 
 - No `alloc`, no heap needed. Task futures are statically allocated.
 - No "fixed capacity" data structures, executor works with 1 or 1000 tasks without needing config/tuning.
-- Integrated timer queue: sleeping is easy, just do `Timer::after(Duration::from_secs(1)).await;`.
+- Integrated timer queue: sleeping is easy, just do `Timer::after_secs(1).await;`.
 - No busy-loop polling: CPU sleeps when there's no work to do, using interrupts or `WFE/SEV`.
 - Efficient polling: a wake will only poll the woken task, not all of them.
 - Fair: a task can't monopolize CPU time even if it's constantly being woken. All other tasks get a chance to run before a given task gets polled for the second time.

embassy-executor/src/arch/riscv32.rs

@@ -6,8 +6,8 @@ pub use thread::*;
 #[cfg(feature = "executor-thread")]
 mod thread {
     use core::marker::PhantomData;
-    use core::sync::atomic::{AtomicBool, Ordering};
 
+    use atomic_polyfill::{AtomicBool, Ordering};
     #[cfg(feature = "nightly")]
     pub use embassy_macros::main_riscv as main;
 

embassy-executor/src/arch/wasm.rs

@@ -73,9 +73,10 @@ mod thread {
         pub fn start(&'static mut self, init: impl FnOnce(Spawner)) {
             unsafe {
                 let executor = &self.inner;
-                self.ctx.closure.write(Closure::new(move |_| {
+                let future = Closure::new(move |_| {
                     executor.poll();
-                }));
+                });
+                self.ctx.closure.write_in_place(|| future);
                 init(self.inner.spawner());
             }
         }

embassy-executor/src/lib.rs

@@ -33,6 +33,7 @@ check_at_most_one!("arch-cortex-m", "arch-riscv32", "arch-xtensa", "arch-std", "
 mod arch;
 
 #[cfg(feature = "_arch")]
+#[allow(unused_imports)] // don't warn if the module is empty.
 pub use arch::*;
 
 pub mod raw;
@@ -46,7 +47,6 @@ pub use spawner::*;
 pub mod _export {
     #[cfg(feature = "rtos-trace")]
     pub use rtos_trace::trace;
-    pub use static_cell::StaticCell;
 
     /// Expands the given block of code when `embassy-executor` is compiled with
     /// the `rtos-trace-interrupt` feature.

embassy-executor/src/raw/mod.rs

@@ -203,7 +203,7 @@ impl<F: Future + 'static> AvailableTask<F> {
     fn initialize_impl<S>(self, future: impl FnOnce() -> F) -> SpawnToken<S> {
         unsafe {
             self.task.raw.poll_fn.set(Some(TaskStorage::<F>::poll));
-            self.task.future.write(future());
+            self.task.future.write_in_place(future);
 
             let task = TaskRef::new(self.task);
 

embassy-executor/src/raw/util.rs

@@ -17,8 +17,9 @@ impl<T> UninitCell<T> {
         &mut *self.as_mut_ptr()
     }
 
-    pub unsafe fn write(&self, val: T) {
+    #[inline(never)]
-        ptr::write(self.as_mut_ptr(), val)
+    pub unsafe fn write_in_place(&self, func: impl FnOnce() -> T) {
+        ptr::write(self.as_mut_ptr(), func())
     }
 
     pub unsafe fn drop_in_place(&self) {

embassy-executor/src/raw/waker.rs

@@ -3,7 +3,7 @@ use core::task::{RawWaker, RawWakerVTable, Waker};
 
 use super::{wake_task, TaskHeader, TaskRef};
 
-const VTABLE: RawWakerVTable = RawWakerVTable::new(clone, wake, wake, drop);
+static VTABLE: RawWakerVTable = RawWakerVTable::new(clone, wake, wake, drop);
 
 unsafe fn clone(p: *const ()) -> RawWaker {
     RawWaker::new(p, &VTABLE)

embassy-hal-internal/README.md

@@ -1,4 +1,4 @@
-# embassy-macros
+# embassy-hal-internal
 
 An [Embassy](https://embassy.dev) project.
 

embassy-hal-internal/src/interrupt.rs

@@ -4,6 +4,7 @@ use core::sync::atomic::{compiler_fence, Ordering};
 
 use cortex_m::interrupt::InterruptNumber;
 use cortex_m::peripheral::NVIC;
+use critical_section::CriticalSection;
 
 /// Generate a standard `mod interrupt` for a HAL.
 #[macro_export]
@@ -91,6 +92,12 @@ macro_rules! interrupt_mod {
                     fn set_priority(prio: crate::interrupt::Priority) {
                         Self::IRQ.set_priority(prio)
                     }
+
+                    /// Set the interrupt priority with an already-acquired critical section
+                    #[inline]
+                    fn set_priority_with_cs(cs: critical_section::CriticalSection, prio: crate::interrupt::Priority) {
+                        Self::IRQ.set_priority_with_cs(cs, prio)
+                    }
                 }
 
                 $(
@@ -195,10 +202,29 @@ pub unsafe trait InterruptExt: InterruptNumber + Copy {
     /// Set the interrupt priority.
     #[inline]
     fn set_priority(self, prio: Priority) {
-        critical_section::with(|_| unsafe {
+        unsafe {
             let mut nvic: cortex_m::peripheral::NVIC = mem::transmute(());
-            nvic.set_priority(self, prio.into())
+
-        })
+            // On thumbv6, set_priority must do a RMW to change 8bit in a 32bit reg.
+            #[cfg(armv6m)]
+            critical_section::with(|_| nvic.set_priority(self, prio.into()));
+            // On thumbv7+, set_priority does an atomic 8bit write, so no CS needed.
+            #[cfg(not(armv6m))]
+            nvic.set_priority(self, prio.into());
+        }
+    }
+
+    /// Set the interrupt priority with an already-acquired critical section
+    ///
+    /// Equivalent to `set_priority`, except you pass a `CriticalSection` to prove
+    /// you've already acquired a critical section. This prevents acquiring another
+    /// one, which saves code size.
+    #[inline]
+    fn set_priority_with_cs(self, _cs: CriticalSection, prio: Priority) {
+        unsafe {
+            let mut nvic: cortex_m::peripheral::NVIC = mem::transmute(());
+            nvic.set_priority(self, prio.into());
+        }
     }
 }
 

embassy-hal-internal/src/lib.rs

@@ -10,7 +10,6 @@ pub mod drop;
 mod macros;
 mod peripheral;
 pub mod ratio;
-pub mod ring_buffer;
 pub use peripheral::{Peripheral, PeripheralRef};
 
 #[cfg(feature = "cortex-m")]

embassy-hal-internal/src/macros.rs

@@ -48,17 +48,23 @@ macro_rules! peripherals_struct {
             ///Returns all the peripherals *once*
             #[inline]
             pub(crate) fn take() -> Self {
+                critical_section::with(Self::take_with_cs)
+            }
 
+            ///Returns all the peripherals *once*
+            #[inline]
+            pub(crate) fn take_with_cs(_cs: critical_section::CriticalSection) -> Self {
                 #[no_mangle]
                 static mut _EMBASSY_DEVICE_PERIPHERALS: bool = false;
 
-                critical_section::with(|_| unsafe {
+                // safety: OK because we're inside a CS.
+                unsafe {
                     if _EMBASSY_DEVICE_PERIPHERALS {
                         panic!("init called more than once!")
                     }
                     _EMBASSY_DEVICE_PERIPHERALS = true;
                     Self::steal()
-                })
+                }
             }
         }
 

embassy-hal-internal/src/ring_buffer.rs

@@ -1,136 +0,0 @@
-pub struct RingBuffer<'a> {
-    buf: &'a mut [u8],
-    start: usize,
-    end: usize,
-    empty: bool,
-}
-
-impl<'a> RingBuffer<'a> {
-    pub fn new(buf: &'a mut [u8]) -> Self {
-        Self {
-            buf,
-            start: 0,
-            end: 0,
-            empty: true,
-        }
-    }
-
-    pub fn push_buf(&mut self) -> &mut [u8] {
-        if self.start == self.end && !self.empty {
-            trace!("  ringbuf: push_buf empty");
-            return &mut self.buf[..0];
-        }
-
-        let n = if self.start <= self.end {
-            self.buf.len() - self.end
-        } else {
-            self.start - self.end
-        };
-
-        trace!("  ringbuf: push_buf {:?}..{:?}", self.end, self.end + n);
-        &mut self.buf[self.end..self.end + n]
-    }
-
-    pub fn push(&mut self, n: usize) {
-        trace!("  ringbuf: push {:?}", n);
-        if n == 0 {
-            return;
-        }
-
-        self.end = self.wrap(self.end + n);
-        self.empty = false;
-    }
-
-    pub fn pop_buf(&mut self) -> &mut [u8] {
-        if self.empty {
-            trace!("  ringbuf: pop_buf empty");
-            return &mut self.buf[..0];
-        }
-
-        let n = if self.end <= self.start {
-            self.buf.len() - self.start
-        } else {
-            self.end - self.start
-        };
-
-        trace!("  ringbuf: pop_buf {:?}..{:?}", self.start, self.start + n);
-        &mut self.buf[self.start..self.start + n]
-    }
-
-    pub fn pop(&mut self, n: usize) {
-        trace!("  ringbuf: pop {:?}", n);
-        if n == 0 {
-            return;
-        }
-
-        self.start = self.wrap(self.start + n);
-        self.empty = self.start == self.end;
-    }
-
-    pub fn is_full(&self) -> bool {
-        self.start == self.end && !self.empty
-    }
-
-    pub fn is_empty(&self) -> bool {
-        self.empty
-    }
-
-    pub fn clear(&mut self) {
-        self.start = 0;
-        self.end = 0;
-        self.empty = true;
-    }
-
-    fn wrap(&self, n: usize) -> usize {
-        assert!(n <= self.buf.len());
-        if n == self.buf.len() {
-            0
-        } else {
-            n
-        }
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-
-    #[test]
-    fn push_pop() {
-        let mut b = [0; 4];
-        let mut rb = RingBuffer::new(&mut b);
-        let buf = rb.push_buf();
-        assert_eq!(4, buf.len());
-        buf[0] = 1;
-        buf[1] = 2;
-        buf[2] = 3;
-        buf[3] = 4;
-        rb.push(4);
-
-        let buf = rb.pop_buf();
-        assert_eq!(4, buf.len());
-        assert_eq!(1, buf[0]);
-        rb.pop(1);
-
-        let buf = rb.pop_buf();
-        assert_eq!(3, buf.len());
-        assert_eq!(2, buf[0]);
-        rb.pop(1);
-
-        let buf = rb.pop_buf();
-        assert_eq!(2, buf.len());
-        assert_eq!(3, buf[0]);
-        rb.pop(1);
-
-        let buf = rb.pop_buf();
-        assert_eq!(1, buf.len());
-        assert_eq!(4, buf[0]);
-        rb.pop(1);
-
-        let buf = rb.pop_buf();
-        assert_eq!(0, buf.len());
-
-        let buf = rb.push_buf();
-        assert_eq!(4, buf.len());
-    }
-}

embassy-lora/Cargo.toml

@@ -20,15 +20,12 @@ defmt = ["dep:defmt", "lorawan-device/defmt"]
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }
 
-embassy-time = { version = "0.1.3", path = "../embassy-time", optional = true }
+embassy-time = { version = "0.1.5", path = "../embassy-time", optional = true }
-embassy-sync = { version = "0.3.0", path = "../embassy-sync" }
+embassy-sync = { version = "0.4.0", path = "../embassy-sync" }
 embassy-stm32 = { version = "0.1.0", path = "../embassy-stm32", default-features = false, optional = true }
 embedded-hal-async = { version = "=1.0.0-rc.1" }
 embedded-hal = { version = "0.2", features = ["unproven"] }
 
 futures = { version = "0.3.17", default-features = false, features = [ "async-await" ] }
-lora-phy = { version = "1" }
+lora-phy = { version = "2" }
-lorawan-device = { version = "0.10.0", default-features = false, features = ["async"], optional = true }
+lorawan-device = { version = "0.11.0", default-features = false, features = ["async"], optional = true }
-
-[patch.crates-io]
-lora-phy = { git = "https://github.com/embassy-rs/lora-phy", rev = "1323eccc1c470d4259f95f4f315d1be830d572a3"}

embassy-lora/src/iv.rs

@@ -67,24 +67,20 @@ where
         self.board_type = board_type;
     }
     async fn set_nss_low(&mut self) -> Result<(), RadioError> {
-        let pwr = pac::PWR;
+        pac::PWR.subghzspicr().modify(|w| w.set_nss(false));
-        pwr.subghzspicr().modify(|w| w.set_nss(pac::pwr::vals::Nss::LOW));
         Ok(())
     }
     async fn set_nss_high(&mut self) -> Result<(), RadioError> {
-        let pwr = pac::PWR;
+        pac::PWR.subghzspicr().modify(|w| w.set_nss(true));
-        pwr.subghzspicr().modify(|w| w.set_nss(pac::pwr::vals::Nss::HIGH));
         Ok(())
     }
     async fn reset(&mut self, _delay: &mut impl DelayUs) -> Result<(), RadioError> {
-        let rcc = pac::RCC;
+        pac::RCC.csr().modify(|w| w.set_rfrst(true));
-        rcc.csr().modify(|w| w.set_rfrst(true));
+        pac::RCC.csr().modify(|w| w.set_rfrst(false));
-        rcc.csr().modify(|w| w.set_rfrst(false));
         Ok(())
     }
     async fn wait_on_busy(&mut self) -> Result<(), RadioError> {
-        let pwr = pac::PWR;
+        while pac::PWR.sr2().read().rfbusys() {}
-        while pwr.sr2().read().rfbusys() == pac::pwr::vals::Rfbusys::BUSY {}
         Ok(())
     }
 

embassy-lora/src/lib.rs

@@ -1,5 +1,6 @@
 #![no_std]
 #![feature(async_fn_in_trait, impl_trait_projections)]
+#![allow(stable_features, unknown_lints, async_fn_in_trait)]
 //! embassy-lora holds LoRa-specific functionality.
 
 pub(crate) mod fmt;
@@ -34,6 +35,6 @@ impl lorawan_device::async_device::radio::Timer for LoraTimer {
     }
 
     async fn delay_ms(&mut self, millis: u64) {
-        Timer::after(Duration::from_millis(millis)).await
+        Timer::after_millis(millis).await
     }
 }

embassy-macros/src/macros/main.rs

@@ -53,8 +53,7 @@ pub fn wasm() -> TokenStream {
     quote! {
         #[wasm_bindgen::prelude::wasm_bindgen(start)]
         pub fn main() -> Result<(), wasm_bindgen::JsValue> {
-            static EXECUTOR: ::embassy_executor::_export::StaticCell<::embassy_executor::Executor> = ::embassy_executor::_export::StaticCell::new();
+            let executor = ::std::boxed::Box::leak(::std::boxed::Box::new(::embassy_executor::Executor::new()));
-            let executor = EXECUTOR.init(::embassy_executor::Executor::new());
 
             executor.start(|spawner| {
                 spawner.spawn(__embassy_main(spawner)).unwrap();

embassy-net-adin1110/Cargo.toml

@@ -10,21 +10,19 @@ edition = "2021"
 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
 
 [dependencies]
-heapless = "0.7.16"
+heapless = "0.8"
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4", default-features = false, optional = true }
 embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1" }
 embedded-hal-async = { version = "=1.0.0-rc.1" }
 embedded-hal-bus = { version = "=0.1.0-rc.1", features = ["async"] }
-embassy-net-driver-channel = { version = "0.1.0", path = "../embassy-net-driver-channel" }
+embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel" }
-embassy-time = { version = "0.1.3" }
+embassy-time = { version = "0.1.5", path = "../embassy-time" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }
 bitfield = "0.14.0"
 
 [dev-dependencies]
-# reenable when https://github.com/dbrgn/embedded-hal-mock/pull/86 is merged.
+embedded-hal-mock = { version = "=0.10.0-rc.1", features = ["embedded-hal-async", "eh1"] }
-#embedded-hal-mock = { git = "https://github.com/dbrgn/embedded-hal-mock", branch = "1-alpha", features = ["embedded-hal-async", "eh1"] }] }
-embedded-hal-mock = { git = "https://github.com/newAM/embedded-hal-mock", branch = "eh1-rc.1", features = ["embedded-hal-async", "eh1"] }
 crc = "3.0.1"
 env_logger = "0.10"
 critical-section = { version = "1.1.2", features = ["std"] }

embassy-net-adin1110/src/lib.rs

@@ -1,5 +1,6 @@
 #![deny(clippy::pedantic)]
 #![feature(async_fn_in_trait)]
+#![allow(stable_features, unknown_lints, async_fn_in_trait)]
 #![cfg_attr(not(any(test, feature = "std")), no_std)]
 #![allow(clippy::module_name_repetitions)]
 #![allow(clippy::missing_errors_doc)]
@@ -20,7 +21,7 @@ pub use crc32::ETH_FCS;
 use crc8::crc8;
 use embassy_futures::select::{select, Either};
 use embassy_net_driver_channel as ch;
-use embassy_time::{Duration, Timer};
+use embassy_time::Timer;
 use embedded_hal_1::digital::OutputPin;
 use embedded_hal_async::digital::Wait;
 use embedded_hal_async::spi::{Error, Operation, SpiDevice};
@@ -609,12 +610,12 @@ pub async fn new<const N_RX: usize, const N_TX: usize, SPI: SpiDevice, INT: Wait
     reset.set_low().unwrap();
 
     // Wait t1: 20-43mS
-    Timer::after(Duration::from_millis(30)).await;
+    Timer::after_millis(30).await;
 
     reset.set_high().unwrap();
 
     // Wait t3: 50mS
-    Timer::after(Duration::from_millis(50)).await;
+    Timer::after_millis(50).await;
 
     // Create device
     let mut mac = ADIN1110::new(spi_dev, spi_crc, append_fcs_on_tx);

embassy-net-driver-channel/CHANGELOG.md

@@ -0,0 +1,16 @@
+# Changelog
+
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
+and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
+
+## 0.2.0 - 2023-10-18
+
+- Update `embassy-net-driver` to v0.2
+- `Runner::new` now takes an `embassy_net_driver::HardwareAddress` parameter.
+- `Runner::set_ethernet_address` is now `set_hardware_address`.
+
+## 0.1.0 - 2023-06-29
+
+- First release

embassy-net-driver-channel/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "embassy-net-driver-channel"
-version = "0.1.0"
+version = "0.2.0"
 edition = "2021"
 license = "MIT OR Apache-2.0"
 description = "High-level channel-based driver for the `embassy-net` async TCP/IP network stack."
@@ -24,6 +24,6 @@ features = ["defmt"]
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }
 
-embassy-sync = { version = "0.3.0", path = "../embassy-sync" }
+embassy-sync = { version = "0.4.0", path = "../embassy-sync" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }
-embassy-net-driver = { version = "0.1.0", path = "../embassy-net-driver" }
+embassy-net-driver = { version = "0.2.0", path = "../embassy-net-driver" }

embassy-net-driver-channel/README.md

@@ -7,7 +7,9 @@ The `embassy-net-driver` trait is polling-based. To implement it, you must write
 hand, and hook up the `Waker`s provided by `embassy-net` to the right interrupt handlers so that `embassy-net`
 knows when to poll your driver again to make more progress.
 
-With `embassy-net-driver-channel`
+With `embassy-net-driver-channel` you get a "channel-like" interface instead, where you can send/receive packets
+to/from embassy-net. The intended usage is to spawn a "driver task" in the background that does this, passing
+packets between the hardware and the channel.
 
 ## A note about deadlocks
 
@@ -18,19 +20,19 @@ loop {
     // Wait for either..
     match select(
         // ... the chip signaling an interrupt, indicating a packet is available to receive, or
-        irq_pin.wait_for_low(), 
+        irq_pin.wait_for_low(),
         // ... a TX buffer becoming available, i.e. embassy-net wants to send a packet
         tx_chan.tx_buf(),
     ).await {
         Either::First(_) => {
             // a packet is ready to be received!
             let buf = rx_chan.rx_buf().await; // allocate a rx buf from the packet queue
-            let n = receive_packet_over_spi(buf).await; 
+            let n = receive_packet_over_spi(buf).await;
             rx_chan.rx_done(n);
         }
         Either::Second(buf) => {
             // a packet is ready to be sent!
-            send_packet_over_spi(buf).await; 
+            send_packet_over_spi(buf).await;
             tx_chan.tx_done();
         }
     }
@@ -41,7 +43,7 @@ However, this code has a latent deadlock bug. The symptom is it can hang at `rx_
 
 The reason is that, under load, both the TX and RX queues can get full at the same time. When this happens, the `embassy-net` task stalls trying to send because the TX queue is full, therefore it stops processing packets in the RX queue. Your driver task also stalls because the RX queue is full, therefore it stops processing packets in the TX queue.
 
-The fix is to make sure to always service the TX queue while you're waiting for space to become available in the TX queue. For example, select on either "tx_chan.tx_buf() available" or "INT is low AND rx_chan.rx_buf() available":
+The fix is to make sure to always service the TX queue while you're waiting for space to become available in the RX queue. For example, select on either "tx_chan.tx_buf() available" or "INT is low AND rx_chan.rx_buf() available":
 
 ```rust,ignore
 loop {
@@ -58,12 +60,12 @@ loop {
     ).await {
         Either::First(buf) => {
             // a packet is ready to be received!
-            let n = receive_packet_over_spi(buf).await; 
+            let n = receive_packet_over_spi(buf).await;
             rx_chan.rx_done(n);
         }
         Either::Second(buf) => {
             // a packet is ready to be sent!
-            send_packet_over_spi(buf).await; 
+            send_packet_over_spi(buf).await;
             tx_chan.tx_done();
         }
     }
@@ -79,12 +81,10 @@ These `embassy-net` drivers are implemented using this crate. You can look at th
 - [`embassy-net-wiznet`](https://github.com/embassy-rs/embassy/tree/main/embassy-net-wiznet) for Wiznet SPI Ethernet MAC+PHY chips.
 - [`embassy-net-esp-hosted`](https://github.com/embassy-rs/embassy/tree/main/embassy-net-esp-hosted) for using ESP32 chips with the [`esp-hosted`](https://github.com/espressif/esp-hosted) firmware as WiFi adapters for another non-ESP32 MCU.
 
-
 ## Interoperability
 
 This crate can run on any executor.
 
-
 ## License
 
 This work is licensed under either of

embassy-net-driver-channel/src/lib.rs

@@ -8,9 +8,8 @@ use core::cell::RefCell;
 use core::mem::MaybeUninit;
 use core::task::{Context, Poll};
 
-use driver::HardwareAddress;
 pub use embassy_net_driver as driver;
-use embassy_net_driver::{Capabilities, LinkState, Medium};
+use embassy_net_driver::{Capabilities, LinkState};
 use embassy_sync::blocking_mutex::raw::NoopRawMutex;
 use embassy_sync::blocking_mutex::Mutex;
 use embassy_sync::waitqueue::WakerRegistration;
@@ -161,18 +160,10 @@ impl<'d> StateRunner<'d> {
         });
     }
 
-    pub fn set_ethernet_address(&self, address: [u8; 6]) {
+    pub fn set_hardware_address(&self, address: driver::HardwareAddress) {
         self.shared.lock(|s| {
             let s = &mut *s.borrow_mut();
-            s.hardware_address = driver::HardwareAddress::Ethernet(address);
+            s.hardware_address = address;
-            s.waker.wake();
-        });
-    }
-
-    pub fn set_ieee802154_address(&self, address: [u8; 8]) {
-        self.shared.lock(|s| {
-            let s = &mut *s.borrow_mut();
-            s.hardware_address = driver::HardwareAddress::Ieee802154(address);
             s.waker.wake();
         });
     }
@@ -232,11 +223,6 @@ pub fn new<'d, const MTU: usize, const N_RX: usize, const N_TX: usize>(
 ) -> (Runner<'d, MTU>, Device<'d, MTU>) {
     let mut caps = Capabilities::default();
     caps.max_transmission_unit = MTU;
-    caps.medium = match &hardware_address {
-        HardwareAddress::Ethernet(_) => Medium::Ethernet,
-        HardwareAddress::Ieee802154(_) => Medium::Ieee802154,
-        HardwareAddress::Ip => Medium::Ip,
-    };
 
     // safety: this is a self-referential struct, however:
     // - it can't move while the `'d` borrow is active.

embassy-net-driver/CHANGELOG.md

@@ -0,0 +1,17 @@
+# Changelog
+
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
+and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
+
+## 0.2.0 - 2023-10-18
+
+- Added support for IEEE 802.15.4 mediums.
+- Added `Driver::hardware_address()`, `HardwareAddress`.
+- Removed `Medium` enum. The medium is deduced out of the hardware address.
+- Removed `Driver::ethernet_address()`. Replacement is `hardware_address()`.
+
+## 0.1.0 - 2023-06-29
+
+- First release

embassy-net-driver/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "embassy-net-driver"
-version = "0.1.0"
+version = "0.2.0"
 edition = "2021"
 license = "MIT OR Apache-2.0"
 description = "Driver trait for the `embassy-net` async TCP/IP network stack."

embassy-net-driver/src/lib.rs

@@ -7,12 +7,23 @@ use core::task::Context;
 /// Representation of an hardware address, such as an Ethernet address or an IEEE802.15.4 address.
 #[derive(Debug, Clone, Copy, PartialEq, Eq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[non_exhaustive]
 pub enum HardwareAddress {
-    /// A six-octet Ethernet address
+    /// Ethernet medium, with a A six-octet Ethernet address.
+    ///
+    /// Devices of this type send and receive Ethernet frames,
+    /// and interfaces using it must do neighbor discovery via ARP or NDISC.
+    ///
+    /// Examples of devices of this type are Ethernet, WiFi (802.11), Linux `tap`, and VPNs in tap (layer 2) mode.
     Ethernet([u8; 6]),
-    /// An eight-octet IEEE802.15.4 address
+    /// 6LoWPAN over IEEE802.15.4, with an eight-octet address.
     Ieee802154([u8; 8]),
-    /// Indicates that a Driver is IP-native, and has no hardware address
+    /// Indicates that a Driver is IP-native, and has no hardware address.
+    ///
+    /// Devices of this type send and receive IP frames, without an
+    /// Ethernet header. MAC addresses are not used, and no neighbor discovery (ARP, NDISC) is done.
+    ///
+    /// Examples of devices of this type are the Linux `tun`, PPP interfaces, VPNs in tun (layer 3) mode.
     Ip,
 }
 
@@ -64,6 +75,10 @@ pub trait Driver {
     fn capabilities(&self) -> Capabilities;
 
     /// Get the device's hardware address.
+    ///
+    /// The returned hardware address also determines the "medium" of this driver. This indicates
+    /// what kind of packet the sent/received bytes are, and determines some behaviors of
+    /// the interface. For example, ARP/NDISC address resolution is only done for Ethernet mediums.
     fn hardware_address(&self) -> HardwareAddress;
 }
 
@@ -124,13 +139,6 @@ pub trait TxToken {
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 #[non_exhaustive]
 pub struct Capabilities {
-    /// Medium of the device.
-    ///
-    /// This indicates what kind of packet the sent/received bytes are, and determines
-    /// some behaviors of Interface. For example, ARP/NDISC address resolution is only done
-    /// for Ethernet mediums.
-    pub medium: Medium,
-
     /// Maximum transmission unit.
     ///
     /// The network device is unable to send or receive frames larger than the value returned
@@ -161,32 +169,6 @@ pub struct Capabilities {
     pub checksum: ChecksumCapabilities,
 }
 
-/// Type of medium of a device.
-#[derive(Debug, Eq, PartialEq, Copy, Clone)]
-#[cfg_attr(feature = "defmt", derive(defmt::Format))]
-pub enum Medium {
-    /// Ethernet medium. Devices of this type send and receive Ethernet frames,
-    /// and interfaces using it must do neighbor discovery via ARP or NDISC.
-    ///
-    /// Examples of devices of this type are Ethernet, WiFi (802.11), Linux `tap`, and VPNs in tap (layer 2) mode.
-    Ethernet,
-
-    /// IP medium. Devices of this type send and receive IP frames, without an
-    /// Ethernet header. MAC addresses are not used, and no neighbor discovery (ARP, NDISC) is done.
-    ///
-    /// Examples of devices of this type are the Linux `tun`, PPP interfaces, VPNs in tun (layer 3) mode.
-    Ip,
-
-    /// IEEE 802_15_4 medium
-    Ieee802154,
-}
-
-impl Default for Medium {
-    fn default() -> Medium {
-        Medium::Ethernet
-    }
-}
-
 /// A description of checksum behavior for every supported protocol.
 #[derive(Debug, Clone, Default)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]

embassy-net-enc28j60/Cargo.toml

@@ -10,8 +10,8 @@ edition = "2021"
 [dependencies]
 embedded-hal = { version = "1.0.0-rc.1" }
 embedded-hal-async = { version = "=1.0.0-rc.1" }
-embassy-net-driver = { version = "0.1.0", path = "../embassy-net-driver" }
+embassy-net-driver = { version = "0.2.0", path = "../embassy-net-driver" }
-embassy-time = { version = "0.1.3", path = "../embassy-time" }
+embassy-time = { version = "0.1.5", path = "../embassy-time" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }
 
 defmt = { version = "0.3", optional = true }

embassy-net-enc28j60/src/lib.rs

@@ -19,7 +19,7 @@ mod traits;
 use core::cmp;
 use core::convert::TryInto;
 
-use embassy_net_driver::{Capabilities, HardwareAddress, LinkState, Medium};
+use embassy_net_driver::{Capabilities, HardwareAddress, LinkState};
 use embassy_time::Duration;
 use embedded_hal::digital::OutputPin;
 use embedded_hal::spi::{Operation, SpiDevice};
@@ -194,10 +194,15 @@ where
         self.bit_field_set(common::Register::ECON1, common::ECON1::mask().rxen());
     }
 
+    /// Returns the device's MAC address
+    pub fn address(&self) -> [u8; 6] {
+        self.mac_addr
+    }
+
     /// Flushes the transmit buffer, ensuring all pending transmissions have completed
     /// NOTE: The returned packet *must* be `read` or `ignore`-d, otherwise this method will always
     /// return `None` on subsequent invocations
-    pub fn receive<'a>(&mut self, buf: &'a mut [u8]) -> Option<&'a mut [u8]> {
+    pub fn receive(&mut self, buf: &mut [u8]) -> Option<usize> {
         if self.pending_packets() == 0 {
             // Errata #6: we can't rely on PKTIF so we check PKTCNT
             return None;
@@ -241,7 +246,7 @@ where
 
         self.next_packet = next_packet;
 
-        Some(&mut buf[..len as usize])
+        Some(len as usize)
     }
 
     fn wait_tx_ready(&mut self) {
@@ -642,9 +647,8 @@ where
     fn receive(&mut self, cx: &mut core::task::Context) -> Option<(Self::RxToken<'_>, Self::TxToken<'_>)> {
         let rx_buf = unsafe { &mut RX_BUF };
         let tx_buf = unsafe { &mut TX_BUF };
-        if let Some(pkt) = self.receive(rx_buf) {
+        if let Some(n) = self.receive(rx_buf) {
-            let n = pkt.len();
+            Some((RxToken { buf: &mut rx_buf[..n] }, TxToken { buf: tx_buf, eth: self }))
-            Some((RxToken { buf: &mut pkt[..n] }, TxToken { buf: tx_buf, eth: self }))
         } else {
             cx.waker().wake_by_ref();
             None
@@ -667,7 +671,6 @@ where
     fn capabilities(&self) -> Capabilities {
         let mut caps = Capabilities::default();
         caps.max_transmission_unit = MTU;
-        caps.medium = Medium::Ethernet;
         caps
     }
 

embassy-net-esp-hosted/Cargo.toml

@@ -7,17 +7,17 @@ edition = "2021"
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }
 
-embassy-time = { version = "0.1.3", path = "../embassy-time" }
+embassy-time = { version = "0.1.5", path = "../embassy-time" }
-embassy-sync = { version = "0.3.0", path = "../embassy-sync"}
+embassy-sync = { version = "0.4.0", path = "../embassy-sync"}
 embassy-futures = { version = "0.1.0", path = "../embassy-futures"}
-embassy-net-driver-channel = { version = "0.1.0", path = "../embassy-net-driver-channel"}
+embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel"}
 
 embedded-hal = { version = "1.0.0-rc.1" }
 embedded-hal-async = { version = "=1.0.0-rc.1" }
 
-noproto = { git="https://github.com/embassy-rs/noproto", default-features = false, features = ["derive"] }
+noproto = { git="https://github.com/embassy-rs/noproto", rev = "f5e6d1f325b6ad4e344f60452b09576e24671f62", default-features = false, features = ["derive"] }
 #noproto = { version = "0.1", path = "/home/dirbaio/noproto", default-features = false, features = ["derive"] }
-heapless = "0.7.16"
+heapless = "0.8"
 
 [package.metadata.embassy_docs]
 src_base = "https://github.com/embassy-rs/embassy/blob/embassy-net-esp-hosted-v$VERSION/embassy-net-esp-hosted/src/"

embassy-net-esp-hosted/src/control.rs

@@ -1,5 +1,5 @@
-use ch::driver::LinkState;
 use embassy_net_driver_channel as ch;
+use embassy_net_driver_channel::driver::{HardwareAddress, LinkState};
 use heapless::String;
 
 use crate::ioctl::Shared;
@@ -77,7 +77,7 @@ impl<'a> Control<'a> {
 
         let mac_addr = self.get_mac_addr().await?;
         debug!("mac addr: {:02x}", mac_addr);
-        self.state_ch.set_ethernet_address(mac_addr);
+        self.state_ch.set_hardware_address(HardwareAddress::Ethernet(mac_addr));
 
         Ok(())
     }
@@ -97,8 +97,8 @@ impl<'a> Control<'a> {
 
     pub async fn connect(&mut self, ssid: &str, password: &str) -> Result<(), Error> {
         let req = proto::CtrlMsgReqConnectAp {
-            ssid: String::from(ssid),
+            ssid: unwrap!(String::try_from(ssid)),
-            pwd: String::from(password),
+            pwd: unwrap!(String::try_from(password)),
             bssid: String::new(),
             listen_interval: 3,
             is_wpa3_supported: false,

embassy-net-esp-hosted/src/lib.rs

@@ -169,9 +169,9 @@ where
     pub async fn run(mut self) -> ! {
         debug!("resetting...");
         self.reset.set_low().unwrap();
-        Timer::after(Duration::from_millis(100)).await;
+        Timer::after_millis(100).await;
         self.reset.set_high().unwrap();
-        Timer::after(Duration::from_millis(1000)).await;
+        Timer::after_millis(1000).await;
 
         let mut tx_buf = [0u8; MAX_SPI_BUFFER_SIZE];
         let mut rx_buf = [0u8; MAX_SPI_BUFFER_SIZE];

embassy-net-ppp/Cargo.toml

@@ -15,11 +15,11 @@ log = ["dep:log", "ppproto/log"]
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }
 
-embedded-io-async = { version = "0.5.0" }
+embedded-io-async = { version = "0.6.0" }
-embassy-net-driver-channel = { version = "0.1.0", path = "../embassy-net-driver-channel" }
+embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }
 ppproto = { version = "0.1.2"}
-embassy-sync = { version = "0.3.0", path = "../embassy-sync" }
+embassy-sync = { version = "0.4.0", path = "../embassy-sync" }
 
 [package.metadata.embassy_docs]
 src_base = "https://github.com/embassy-rs/embassy/blob/embassy-net-ppp-v$VERSION/embassy-net-ppp/src/"

embassy-net-ppp/src/lib.rs

@@ -11,7 +11,7 @@ use core::mem::MaybeUninit;
 use embassy_futures::select::{select, Either};
 use embassy_net_driver_channel as ch;
 use embassy_net_driver_channel::driver::LinkState;
-use embedded_io_async::{BufRead, Write, WriteAllError};
+use embedded_io_async::{BufRead, Write};
 use ppproto::pppos::{BufferFullError, PPPoS, PPPoSAction};
 pub use ppproto::{Config, Ipv4Status};
 
@@ -49,23 +49,12 @@ pub enum RunError<E> {
     Read(E),
     /// Writing to the serial port failed.
     Write(E),
-    /// Writing to the serial port wrote zero bytes, indicating it can't accept more data.
-    WriteZero,
     /// Writing to the serial got EOF.
     Eof,
     /// PPP protocol was terminated by the peer
     Terminated,
 }
 
-impl<E> From<WriteAllError<E>> for RunError<E> {
-    fn from(value: WriteAllError<E>) -> Self {
-        match value {
-            WriteAllError::Other(e) => Self::Write(e),
-            WriteAllError::WriteZero => Self::WriteZero,
-        }
-    }
-}
-
 impl<'d> Runner<'d> {
     /// You must call this in a background task for the driver to operate.
     ///
@@ -125,7 +114,7 @@ impl<'d> Runner<'d> {
                             buf[..pkt.len()].copy_from_slice(pkt);
                             rx_chan.rx_done(pkt.len());
                         }
-                        PPPoSAction::Transmit(n) => rw.write_all(&tx_buf[..n]).await?,
+                        PPPoSAction::Transmit(n) => rw.write_all(&tx_buf[..n]).await.map_err(RunError::Write)?,
                     }
 
                     let status = ppp.status();
@@ -148,7 +137,7 @@ impl<'d> Runner<'d> {
                 }
                 Either::Second(pkt) => {
                     match ppp.send(pkt, &mut tx_buf) {
-                        Ok(n) => rw.write_all(&tx_buf[..n]).await?,
+                        Ok(n) => rw.write_all(&tx_buf[..n]).await.map_err(RunError::Write)?,
                         Err(BufferFullError) => unreachable!(),
                     }
                     tx_chan.tx_done();

embassy-net-tuntap/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 edition = "2021"
 
 [dependencies]
-embassy-net-driver = { version = "0.1.0", path = "../embassy-net-driver" }
+embassy-net-driver = { version = "0.2.0", path = "../embassy-net-driver" }
 async-io = "1.6.0"
 log = "0.4.14"
 libc = "0.2.101"

embassy-net-wiznet/Cargo.toml

@@ -10,8 +10,8 @@ edition = "2021"
 [dependencies]
 embedded-hal = { version = "1.0.0-rc.1" }
 embedded-hal-async = { version = "=1.0.0-rc.1" }
-embassy-net-driver-channel = { version = "0.1.0", path = "../embassy-net-driver-channel" }
+embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel" }
-embassy-time = { version = "0.1.3", path = "../embassy-time" }
+embassy-time = { version = "0.1.5", path = "../embassy-time" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }
 defmt = { version = "0.3", optional = true }
 

embassy-net-wiznet/src/lib.rs

@@ -1,14 +1,15 @@
-//! [`embassy-net`](https://crates.io/crates/embassy-net) driver for WIZnet ethernet chips.
 #![no_std]
 #![feature(async_fn_in_trait)]
+#![allow(stable_features, unknown_lints, async_fn_in_trait)]
+#![doc = include_str!("../README.md")]
 
 pub mod chip;
 mod device;
 
-use embassy_futures::select::{select, Either};
+use embassy_futures::select::{select3, Either3};
 use embassy_net_driver_channel as ch;
 use embassy_net_driver_channel::driver::LinkState;
-use embassy_time::{Duration, Timer};
+use embassy_time::{Duration, Ticker, Timer};
 use embedded_hal::digital::OutputPin;
 use embedded_hal_async::digital::Wait;
 use embedded_hal_async::spi::SpiDevice;
@@ -49,32 +50,34 @@ pub struct Runner<'d, C: Chip, SPI: SpiDevice, INT: Wait, RST: OutputPin> {
 impl<'d, C: Chip, SPI: SpiDevice, INT: Wait, RST: OutputPin> Runner<'d, C, SPI, INT, RST> {
     pub async fn run(mut self) -> ! {
         let (state_chan, mut rx_chan, mut tx_chan) = self.ch.split();
+        let mut tick = Ticker::every(Duration::from_millis(500));
         loop {
-            if self.mac.is_link_up().await {
+            match select3(
-                state_chan.set_link_state(LinkState::Up);
+                async {
-                loop {
+                    self.int.wait_for_low().await.ok();
-                    match select(
+                    rx_chan.rx_buf().await
-                        async {
+                },
-                            self.int.wait_for_low().await.ok();
+                tx_chan.tx_buf(),
-                            rx_chan.rx_buf().await
+                tick.next(),
-                        },
+            )
-                        tx_chan.tx_buf(),
+            .await
-                    )
+            {
-                    .await
+                Either3::First(p) => {
-                    {
+                    if let Ok(n) = self.mac.read_frame(p).await {
-                        Either::First(p) => {
+                        rx_chan.rx_done(n);
-                            if let Ok(n) = self.mac.read_frame(p).await {
+                    }
-                                rx_chan.rx_done(n);
+                }
-                            }
+                Either3::Second(p) => {
-                        }
+                    self.mac.write_frame(p).await.ok();
-                        Either::Second(p) => {
+                    tx_chan.tx_done();
-                            self.mac.write_frame(p).await.ok();
+                }
-                            tx_chan.tx_done();
+                Either3::Third(()) => {
-                        }
+                    if self.mac.is_link_up().await {
+                        state_chan.set_link_state(LinkState::Up);
+                    } else {
+                        state_chan.set_link_state(LinkState::Down);
                     }
                 }
-            } else {
-                state_chan.set_link_state(LinkState::Down);
             }
         }
     }
@@ -95,12 +98,12 @@ pub async fn new<'a, const N_RX: usize, const N_TX: usize, C: Chip, SPI: SpiDevi
     // Reset the chip.
     reset.set_low().ok();
     // Ensure the reset is registered.
-    Timer::after(Duration::from_millis(1)).await;
+    Timer::after_millis(1).await;
     reset.set_high().ok();
 
     // Wait for PLL lock. Some chips are slower than others.
     // Slowest is w5100s which is 100ms, so let's just wait that.
-    Timer::after(Duration::from_millis(100)).await;
+    Timer::after_millis(100).await;
 
     let mac = WiznetDevice::new(spi_dev, mac_addr).await.unwrap();
 

embassy-net/CHANGELOG.md

@@ -0,0 +1,38 @@
+# Changelog
+
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
+and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
+
+## Unreleased
+
+- Avoid never resolving `TcpIo::read` when the output buffer is empty.
+
+## 0.2.1 - 2023-10-31
+
+- Re-add impl_trait_projections
+- Fix: Reset DHCP socket when the link up is detected 
+
+## 0.2.0 - 2023-10-18
+
+- Re-export `smoltcp::wire::IpEndpoint`
+- Add poll functions on UdpSocket
+- Make dual-stack work in embassy-net
+- Fix multicast support
+- Allow ethernet and 802.15.4 to coexist
+- Add IEEE802.15.4 address to embassy net Stack
+- Use HardwareAddress in Driver
+- Add async versions of smoltcp's `send` and `recv` closure based API
+- add error translation to tcp errors
+- Forward TCP/UDP socket capacity impls
+- allow changing IP config at runtime
+- allow non-'static drivers
+- Remove impl_trait_projections
+- update embedded-io, embedded-nal-async
+- add support for dhcp hostname option
+- Wake stack's task after queueing a DNS query
+
+## 0.1.0 - 2023-06-29
+
+- First release

embassy-net/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "embassy-net"
-version = "0.1.0"
+version = "0.2.1"
 edition = "2021"
 license = "MIT OR Apache-2.0"
 description = "Async TCP/IP network stack for embedded systems"
@@ -33,6 +33,7 @@ udp = ["smoltcp/socket-udp"]
 tcp = ["smoltcp/socket-tcp"]
 dns = ["smoltcp/socket-dns", "smoltcp/proto-dns"]
 dhcpv4 = ["proto-ipv4", "medium-ethernet", "smoltcp/socket-dhcpv4"]
+dhcpv4-hostname = ["dhcpv4"]
 proto-ipv4 = ["smoltcp/proto-ipv4"]
 proto-ipv6 = ["smoltcp/proto-ipv6"]
 medium-ethernet = ["smoltcp/medium-ethernet"]
@@ -45,22 +46,21 @@ igmp = ["smoltcp/proto-igmp"]
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }
 
-smoltcp = { version = "0.10.0", default-features = false, features = [
+smoltcp = { git = "https://github.com/smoltcp-rs/smoltcp", rev = "9b791ae3057e10f7afcb70c67deb5daf714293a9", default-features = false, features = [
   "socket",
   "async",
 ] }
 
-embassy-net-driver = { version = "0.1.0", path = "../embassy-net-driver" }
+embassy-net-driver = { version = "0.2.0", path = "../embassy-net-driver" }
-embassy-time = { version = "0.1.3", path = "../embassy-time" }
+embassy-time = { version = "0.1.5", path = "../embassy-time" }
-embassy-sync = { version = "0.3.0", path = "../embassy-sync" }
+embassy-sync = { version = "0.4.0", path = "../embassy-sync" }
-embedded-io-async = { version = "0.5.0", optional = true }
+embedded-io-async = { version = "0.6.0", optional = true }
 
 managed = { version = "0.8.0", default-features = false, features = [ "map" ] }
-heapless = { version = "0.7.5", default-features = false }
+heapless = { version = "0.8", default-features = false }
 as-slice = "0.2.1"
 generic-array = { version = "0.14.4", default-features = false }
 stable_deref_trait = { version = "1.2.0", default-features = false }
 futures = { version = "0.3.17", default-features = false, features = [ "async-await" ] }
 atomic-pool = "1.0"
-embedded-nal-async = { version = "0.5.0", optional = true }
+embedded-nal-async = { version = "0.7", optional = true }
-atomic-polyfill = { version = "1.0" }

embassy-net/README.md

@@ -4,7 +4,7 @@
 
 It builds on [`smoltcp`](https://github.com/smoltcp-rs/smoltcp). It provides a higher-level and more opinionated
 API. It glues together the components provided by `smoltcp`, handling the low-level details with defaults and
-memory management designed to work well for embedded systems, aiiming for a more "Just Works" experience.
+memory management designed to work well for embedded systems, aiming for a more "Just Works" experience.
 
 ## Features
 

embassy-net/src/device.rs

@@ -1,7 +1,7 @@
 use core::task::Context;
 
-use embassy_net_driver::{Capabilities, Checksum, Driver, Medium, RxToken, TxToken};
+use embassy_net_driver::{Capabilities, Checksum, Driver, RxToken, TxToken};
-use smoltcp::phy;
+use smoltcp::phy::{self, Medium};
 use smoltcp::time::Instant;
 
 pub(crate) struct DriverAdapter<'d, 'c, T>
@@ -11,6 +11,7 @@ where
     // must be Some when actually using this to rx/tx
     pub cx: Option<&'d mut Context<'c>>,
     pub inner: &'d mut T,
+    pub medium: Medium,
 }
 
 impl<'d, 'c, T> phy::Device for DriverAdapter<'d, 'c, T>
@@ -46,19 +47,7 @@ where
 
         smolcaps.max_transmission_unit = caps.max_transmission_unit;
         smolcaps.max_burst_size = caps.max_burst_size;
-        smolcaps.medium = match caps.medium {
+        smolcaps.medium = self.medium;
-            #[cfg(feature = "medium-ethernet")]
-            Medium::Ethernet => phy::Medium::Ethernet,
-            #[cfg(feature = "medium-ip")]
-            Medium::Ip => phy::Medium::Ip,
-            #[cfg(feature = "medium-ieee802154")]
-            Medium::Ieee802154 => phy::Medium::Ieee802154,
-            #[allow(unreachable_patterns)]
-            _ => panic!(
-                "Unsupported medium {:?}. Make sure to enable it in embassy-net's Cargo features.",
-                caps.medium
-            ),
-        };
         smolcaps.checksum.ipv4 = convert(caps.checksum.ipv4);
         smolcaps.checksum.tcp = convert(caps.checksum.tcp);
         smolcaps.checksum.udp = convert(caps.checksum.udp);

embassy-net/src/dns.rs

@@ -101,7 +101,8 @@ where
     async fn get_host_by_address(
         &self,
         _addr: embedded_nal_async::IpAddr,
-    ) -> Result<heapless::String<256>, Self::Error> {
+        _result: &mut [u8],
+    ) -> Result<usize, Self::Error> {
         todo!()
     }
 }

embassy-net/src/lib.rs

@@ -1,5 +1,6 @@
 #![cfg_attr(not(feature = "std"), no_std)]
 #![cfg_attr(feature = "nightly", feature(async_fn_in_trait, impl_trait_projections))]
+#![cfg_attr(feature = "nightly", allow(stable_features, unknown_lints, async_fn_in_trait))]
 #![warn(missing_docs)]
 #![doc = include_str!("../README.md")]
 
@@ -33,13 +34,14 @@ use heapless::Vec;
 pub use smoltcp::iface::MulticastError;
 #[allow(unused_imports)]
 use smoltcp::iface::{Interface, SocketHandle, SocketSet, SocketStorage};
+use smoltcp::phy::Medium;
 #[cfg(feature = "dhcpv4")]
 use smoltcp::socket::dhcpv4::{self, RetryConfig};
 #[cfg(feature = "medium-ethernet")]
 pub use smoltcp::wire::EthernetAddress;
 #[cfg(any(feature = "medium-ethernet", feature = "medium-ieee802154", feature = "medium-ip"))]
 pub use smoltcp::wire::HardwareAddress;
-#[cfg(feature = "udp")]
+#[cfg(any(feature = "udp", feature = "tcp"))]
 pub use smoltcp::wire::IpListenEndpoint;
 #[cfg(feature = "medium-ieee802154")]
 pub use smoltcp::wire::{Ieee802154Address, Ieee802154Frame};
@@ -56,12 +58,22 @@ const LOCAL_PORT_MIN: u16 = 1025;
 const LOCAL_PORT_MAX: u16 = 65535;
 #[cfg(feature = "dns")]
 const MAX_QUERIES: usize = 4;
+#[cfg(feature = "dhcpv4-hostname")]
+const MAX_HOSTNAME_LEN: usize = 32;
 
 /// Memory resources needed for a network stack.
 pub struct StackResources<const SOCK: usize> {
     sockets: [SocketStorage<'static>; SOCK],
     #[cfg(feature = "dns")]
     queries: [Option<dns::DnsQuery>; MAX_QUERIES],
+    #[cfg(feature = "dhcpv4-hostname")]
+    hostname: core::cell::UnsafeCell<HostnameResources>,
+}
+
+#[cfg(feature = "dhcpv4-hostname")]
+struct HostnameResources {
+    option: smoltcp::wire::DhcpOption<'static>,
+    data: [u8; MAX_HOSTNAME_LEN],
 }
 
 impl<const SOCK: usize> StackResources<SOCK> {
@@ -73,6 +85,11 @@ impl<const SOCK: usize> StackResources<SOCK> {
             sockets: [SocketStorage::EMPTY; SOCK],
             #[cfg(feature = "dns")]
             queries: [INIT; MAX_QUERIES],
+            #[cfg(feature = "dhcpv4-hostname")]
+            hostname: core::cell::UnsafeCell::new(HostnameResources {
+                option: smoltcp::wire::DhcpOption { kind: 0, data: &[] },
+                data: [0; MAX_HOSTNAME_LEN],
+            }),
         }
     }
 }
@@ -104,6 +121,7 @@ pub struct StaticConfigV6 {
 /// DHCP configuration.
 #[cfg(feature = "dhcpv4")]
 #[derive(Debug, Clone, PartialEq, Eq)]
+#[non_exhaustive]
 pub struct DhcpConfig {
     /// Maximum lease duration.
     ///
@@ -120,6 +138,9 @@ pub struct DhcpConfig {
     pub server_port: u16,
     /// Client port. This is almost always 68. Do not change unless you know what you're doing.
     pub client_port: u16,
+    /// Our hostname. This will be sent to the DHCP server as Option 12.
+    #[cfg(feature = "dhcpv4-hostname")]
+    pub hostname: Option<heapless::String<MAX_HOSTNAME_LEN>>,
 }
 
 #[cfg(feature = "dhcpv4")]
@@ -131,6 +152,8 @@ impl Default for DhcpConfig {
             ignore_naks: Default::default(),
             server_port: smoltcp::wire::DHCP_SERVER_PORT,
             client_port: smoltcp::wire::DHCP_CLIENT_PORT,
+            #[cfg(feature = "dhcpv4-hostname")]
+            hostname: None,
         }
     }
 }
@@ -232,6 +255,8 @@ struct Inner<D: Driver> {
     dns_socket: SocketHandle,
     #[cfg(feature = "dns")]
     dns_waker: WakerRegistration,
+    #[cfg(feature = "dhcpv4-hostname")]
+    hostname: &'static mut core::cell::UnsafeCell<HostnameResources>,
 }
 
 pub(crate) struct SocketStack {
@@ -241,14 +266,17 @@ pub(crate) struct SocketStack {
     next_local_port: u16,
 }
 
-fn to_smoltcp_hardware_address(addr: driver::HardwareAddress) -> HardwareAddress {
+fn to_smoltcp_hardware_address(addr: driver::HardwareAddress) -> (HardwareAddress, Medium) {
     match addr {
         #[cfg(feature = "medium-ethernet")]
-        driver::HardwareAddress::Ethernet(eth) => HardwareAddress::Ethernet(EthernetAddress(eth)),
+        driver::HardwareAddress::Ethernet(eth) => (HardwareAddress::Ethernet(EthernetAddress(eth)), Medium::Ethernet),
         #[cfg(feature = "medium-ieee802154")]
-        driver::HardwareAddress::Ieee802154(ieee) => HardwareAddress::Ieee802154(Ieee802154Address::Extended(ieee)),
+        driver::HardwareAddress::Ieee802154(ieee) => (
+            HardwareAddress::Ieee802154(Ieee802154Address::Extended(ieee)),
+            Medium::Ieee802154,
+        ),
         #[cfg(feature = "medium-ip")]
-        driver::HardwareAddress::Ip => HardwareAddress::Ip,
+        driver::HardwareAddress::Ip => (HardwareAddress::Ip, Medium::Ip),
 
         #[allow(unreachable_patterns)]
         _ => panic!(
@@ -258,7 +286,7 @@ fn to_smoltcp_hardware_address(addr: driver::HardwareAddress) -> HardwareAddress
     }
 }
 
-impl<D: Driver + 'static> Stack<D> {
+impl<D: Driver> Stack<D> {
     /// Create a new network stack.
     pub fn new<const SOCK: usize>(
         mut device: D,
@@ -266,7 +294,8 @@ impl<D: Driver + 'static> Stack<D> {
         resources: &'static mut StackResources<SOCK>,
         random_seed: u64,
     ) -> Self {
-        let mut iface_cfg = smoltcp::iface::Config::new(to_smoltcp_hardware_address(device.hardware_address()));
+        let (hardware_addr, medium) = to_smoltcp_hardware_address(device.hardware_address());
+        let mut iface_cfg = smoltcp::iface::Config::new(hardware_addr);
         iface_cfg.random_seed = random_seed;
 
         let iface = Interface::new(
@@ -274,6 +303,7 @@ impl<D: Driver + 'static> Stack<D> {
             &mut DriverAdapter {
                 inner: &mut device,
                 cx: None,
+                medium,
             },
             instant_to_smoltcp(Instant::now()),
         );
@@ -307,6 +337,8 @@ impl<D: Driver + 'static> Stack<D> {
             )),
             #[cfg(feature = "dns")]
             dns_waker: WakerRegistration::new(),
+            #[cfg(feature = "dhcpv4-hostname")]
+            hostname: &mut resources.hostname,
         };
 
         #[cfg(feature = "proto-ipv4")]
@@ -331,7 +363,7 @@ impl<D: Driver + 'static> Stack<D> {
 
     /// Get the hardware address of the network interface.
     pub fn hardware_address(&self) -> HardwareAddress {
-        self.with(|_s, i| to_smoltcp_hardware_address(i.device.hardware_address()))
+        self.with(|_s, i| to_smoltcp_hardware_address(i.device.hardware_address()).0)
     }
 
     /// Get whether the link is up.
@@ -484,7 +516,10 @@ impl<D: Driver + 'static> Stack<D> {
             self.with_mut(|s, i| {
                 let socket = s.sockets.get_mut::<dns::Socket>(i.dns_socket);
                 match socket.start_query(s.iface.context(), name, qtype) {
-                    Ok(handle) => Poll::Ready(Ok(handle)),
+                    Ok(handle) => {
+                        s.waker.wake();
+                        Poll::Ready(Ok(handle))
+                    }
                     Err(dns::StartQueryError::NoFreeSlot) => {
                         i.dns_waker.register(cx.waker());
                         Poll::Pending
@@ -555,7 +590,7 @@ impl<D: Driver + 'static> Stack<D> {
 }
 
 #[cfg(feature = "igmp")]
-impl<D: Driver + 'static> Stack<D> {
+impl<D: Driver> Stack<D> {
     /// Join a multicast group.
     pub async fn join_multicast_group<T>(&self, addr: T) -> Result<bool, MulticastError>
     where
@@ -645,7 +680,7 @@ impl SocketStack {
     }
 }
 
-impl<D: Driver + 'static> Inner<D> {
+impl<D: Driver> Inner<D> {
     #[cfg(feature = "proto-ipv4")]
     pub fn set_config_v4(&mut self, _s: &mut SocketStack, config: ConfigV4) {
         // Handle static config.
@@ -673,6 +708,25 @@ impl<D: Driver + 'static> Inner<D> {
                 socket.set_max_lease_duration(c.max_lease_duration.map(crate::time::duration_to_smoltcp));
                 socket.set_ports(c.server_port, c.client_port);
                 socket.set_retry_config(c.retry_config);
+
+                socket.set_outgoing_options(&[]);
+                #[cfg(feature = "dhcpv4-hostname")]
+                if let Some(h) = c.hostname {
+                    // safety: we just did set_outgoing_options([]) so we know the socket is no longer holding a reference.
+                    let hostname = unsafe { &mut *self.hostname.get() };
+
+                    // create data
+                    // safety: we know the buffer lives forever, new borrows the StackResources for 'static.
+                    // also we won't modify it until next call to this function.
+                    hostname.data[..h.len()].copy_from_slice(h.as_bytes());
+                    let data: &[u8] = &hostname.data[..h.len()];
+                    let data: &'static [u8] = unsafe { core::mem::transmute(data) };
+
+                    // set the option.
+                    hostname.option = smoltcp::wire::DhcpOption { data, kind: 12 };
+                    socket.set_outgoing_options(core::slice::from_ref(&hostname.option));
+                }
+
                 socket.reset();
             }
             _ => {
@@ -765,18 +819,28 @@ impl<D: Driver + 'static> Inner<D> {
     fn poll(&mut self, cx: &mut Context<'_>, s: &mut SocketStack) {
         s.waker.register(cx.waker());
 
+        let (_hardware_addr, medium) = to_smoltcp_hardware_address(self.device.hardware_address());
+
         #[cfg(any(feature = "medium-ethernet", feature = "medium-ieee802154"))]
-        if self.device.capabilities().medium == embassy_net_driver::Medium::Ethernet
-            || self.device.capabilities().medium == embassy_net_driver::Medium::Ieee802154
         {
-            s.iface
+            let do_set = match medium {
-                .set_hardware_addr(to_smoltcp_hardware_address(self.device.hardware_address()));
+                #[cfg(feature = "medium-ethernet")]
+                Medium::Ethernet => true,
+                #[cfg(feature = "medium-ieee802154")]
+                Medium::Ieee802154 => true,
+                #[allow(unreachable_patterns)]
+                _ => false,
+            };
+            if do_set {
+                s.iface.set_hardware_addr(_hardware_addr);
+            }
         }
 
         let timestamp = instant_to_smoltcp(Instant::now());
         let mut smoldev = DriverAdapter {
             cx: Some(cx),
             inner: &mut self.device,
+            medium,
         };
         s.iface.poll(timestamp, &mut smoldev, &mut s.sockets);
 
@@ -797,6 +861,9 @@ impl<D: Driver + 'static> Inner<D> {
             let socket = s.sockets.get_mut::<dhcpv4::Socket>(dhcp_handle);
 
             if self.link_up {
+                if old_link_up != self.link_up {
+                    socket.reset();
+                }
                 match socket.poll() {
                     None => {}
                     Some(dhcpv4::Event::Deconfigured) => {

embassy-net/src/tcp.rs

@@ -390,6 +390,13 @@ impl<'d> TcpIo<'d> {
             // CAUTION: smoltcp semantics around EOF are different to what you'd expect
             // from posix-like IO, so we have to tweak things here.
             self.with_mut(|s, _| match s.recv_slice(buf) {
+                // Reading into empty buffer
+                Ok(0) if buf.is_empty() => {
+                    // embedded_io_async::Read's contract is to not block if buf is empty. While
+                    // this function is not a direct implementor of the trait method, we still don't
+                    // want our future to never resolve.
+                    Poll::Ready(Ok(0))
+                }
                 // No data ready
                 Ok(0) => {
                     s.register_recv_waker(cx.waker());
@@ -579,11 +586,10 @@ mod embedded_io_impls {
 /// TCP client compatible with `embedded-nal-async` traits.
 #[cfg(feature = "nightly")]
 pub mod client {
-    use core::cell::UnsafeCell;
+    use core::cell::{Cell, UnsafeCell};
     use core::mem::MaybeUninit;
     use core::ptr::NonNull;
 
-    use atomic_polyfill::{AtomicBool, Ordering};
     use embedded_nal_async::IpAddr;
 
     use super::*;
@@ -612,10 +618,7 @@ pub mod client {
         async fn connect<'a>(
             &'a self,
             remote: embedded_nal_async::SocketAddr,
-        ) -> Result<Self::Connection<'a>, Self::Error>
+        ) -> Result<Self::Connection<'a>, Self::Error> {
-        where
-            Self: 'a,
-        {
             let addr: crate::IpAddress = match remote.ip() {
                 #[cfg(feature = "proto-ipv4")]
                 IpAddr::V4(addr) => crate::IpAddress::Ipv4(crate::Ipv4Address::from_bytes(&addr.octets())),
@@ -702,15 +705,13 @@ pub mod client {
         }
     }
 
-    unsafe impl<const N: usize, const TX_SZ: usize, const RX_SZ: usize> Sync for TcpClientState<N, TX_SZ, RX_SZ> {}
-
     struct Pool<T, const N: usize> {
-        used: [AtomicBool; N],
+        used: [Cell<bool>; N],
         data: [UnsafeCell<MaybeUninit<T>>; N],
     }
 
     impl<T, const N: usize> Pool<T, N> {
-        const VALUE: AtomicBool = AtomicBool::new(false);
+        const VALUE: Cell<bool> = Cell::new(false);
         const UNINIT: UnsafeCell<MaybeUninit<T>> = UnsafeCell::new(MaybeUninit::uninit());
 
         const fn new() -> Self {
@@ -724,7 +725,9 @@ pub mod client {
     impl<T, const N: usize> Pool<T, N> {
         fn alloc(&self) -> Option<NonNull<T>> {
             for n in 0..N {
-                if self.used[n].swap(true, Ordering::SeqCst) == false {
+                // this can't race because Pool is not Sync.
+                if !self.used[n].get() {
+                    self.used[n].set(true);
                     let p = self.data[n].get() as *mut T;
                     return Some(unsafe { NonNull::new_unchecked(p) });
                 }
@@ -738,7 +741,7 @@ pub mod client {
             let n = p.as_ptr().offset_from(origin);
             assert!(n >= 0);
             assert!((n as usize) < N);
-            self.used[n as usize].store(false, Ordering::SeqCst);
+            self.used[n as usize].set(false);
         }
     }
 }

embassy-nrf/Cargo.toml

@@ -51,7 +51,7 @@ nrf52805 = ["nrf52805-pac", "_nrf52"]
 nrf52810 = ["nrf52810-pac", "_nrf52"]
 nrf52811 = ["nrf52811-pac", "_nrf52"]
 nrf52820 = ["nrf52820-pac", "_nrf52"]
-nrf52832 = ["nrf52832-pac", "_nrf52"]
+nrf52832 = ["nrf52832-pac", "_nrf52", "_nrf52832_anomaly_109"]
 nrf52833 = ["nrf52833-pac", "_nrf52", "_gpio-p1"]
 nrf52840 = ["nrf52840-pac", "_nrf52", "_gpio-p1"]
 nrf5340-app-s = ["_nrf5340-app", "_s"]
@@ -90,9 +90,12 @@ _ppi = []
 _dppi = []
 _gpio-p1 = []
 
+# Errata workarounds
+_nrf52832_anomaly_109 = []
+
 [dependencies]
-embassy-time = { version = "0.1.3", path = "../embassy-time", optional = true }
+embassy-time = { version = "0.1.5", path = "../embassy-time", optional = true }
-embassy-sync = { version = "0.3.0", path = "../embassy-sync" }
+embassy-sync = { version = "0.4.0", path = "../embassy-sync" }
 embassy-hal-internal = {version = "0.1.0", path = "../embassy-hal-internal", features = ["cortex-m", "prio-bits-3"] }
 embassy-embedded-hal = {version = "0.1.0", path = "../embassy-embedded-hal" }
 embassy-usb-driver = {version = "0.1.0", path = "../embassy-usb-driver", optional=true }
@@ -100,14 +103,13 @@ embassy-usb-driver = {version = "0.1.0", path = "../embassy-usb-driver", optiona
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = ["unproven"] }
 embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1", optional = true}
 embedded-hal-async = { version = "=1.0.0-rc.1", optional = true}
-embedded-io = { version = "0.5.0" }
+embedded-io = { version = "0.6.0" }
-embedded-io-async = { version = "0.5.0", optional = true }
+embedded-io-async = { version = "0.6.0", optional = true }
 
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }
 cortex-m-rt = ">=0.6.15,<0.8"
 cortex-m = "0.7.6"
-futures = { version = "0.3.17", default-features = false }
 critical-section = "1.1"
 rand_core = "0.6.3"
 fixed = "1.10.0"

embassy-nrf/src/chips/nrf5340_app.rs

@@ -6,10 +6,13 @@ pub mod pac {
     // To avoid cfg spam, we remove _ns or _s suffixes here.
 
     pub use nrf5340_app_pac::NVIC_PRIO_BITS;
-    
+
+    #[cfg(feature="rt")]
+    #[doc(no_inline)]
+    pub use nrf5340_app_pac::interrupt;
+
     #[doc(no_inline)]
     pub use nrf5340_app_pac::{
-        interrupt,
         Interrupt,
         Peripherals,
 
@@ -60,156 +63,167 @@ pub mod pac {
         wdt0_ns as wdt0,
     };
     
-    #[cfg(feature = "nrf5340-app-ns")]
+    /// Non-Secure mode (NS) peripherals
-    #[doc(no_inline)]
+    pub mod ns {
-    pub use nrf5340_app_pac::{
+        #[cfg(feature = "nrf5340-app-ns")]
-        CLOCK_NS as CLOCK,
+        #[doc(no_inline)]
-        COMP_NS as COMP,
+        pub use nrf5340_app_pac::{
-        CTRLAP_NS as CTRLAP,
+            CLOCK_NS as CLOCK,
-        DCNF_NS as DCNF,
+            COMP_NS as COMP,
-        DPPIC_NS as DPPIC,
+            CTRLAP_NS as CTRLAP,
-        EGU0_NS as EGU0,
+            DCNF_NS as DCNF,
-        EGU1_NS as EGU1,
+            DPPIC_NS as DPPIC,
-        EGU2_NS as EGU2,
+            EGU0_NS as EGU0,
-        EGU3_NS as EGU3,
+            EGU1_NS as EGU1,
-        EGU4_NS as EGU4,
+            EGU2_NS as EGU2,
-        EGU5_NS as EGU5,
+            EGU3_NS as EGU3,
-        FPU_NS as FPU,
+            EGU4_NS as EGU4,
-        GPIOTE1_NS as GPIOTE1,
+            EGU5_NS as EGU5,
-        I2S0_NS as I2S0,
+            FPU_NS as FPU,
-        IPC_NS as IPC,
+            GPIOTE1_NS as GPIOTE1,
-        KMU_NS as KMU,
+            I2S0_NS as I2S0,
-        LPCOMP_NS as LPCOMP,
+            IPC_NS as IPC,
-        MUTEX_NS as MUTEX,
+            KMU_NS as KMU,
-        NFCT_NS as NFCT,
+            LPCOMP_NS as LPCOMP,
-        NVMC_NS as NVMC,
+            MUTEX_NS as MUTEX,
-        OSCILLATORS_NS as OSCILLATORS,
+            NFCT_NS as NFCT,
-        P0_NS as P0,
+            NVMC_NS as NVMC,
-        P1_NS as P1,
+            OSCILLATORS_NS as OSCILLATORS,
-        PDM0_NS as PDM0,
+            P0_NS as P0,
-        POWER_NS as POWER,
+            P1_NS as P1,
-        PWM0_NS as PWM0,
+            PDM0_NS as PDM0,
-        PWM1_NS as PWM1,
+            POWER_NS as POWER,
-        PWM2_NS as PWM2,
+            PWM0_NS as PWM0,
-        PWM3_NS as PWM3,
+            PWM1_NS as PWM1,
-        QDEC0_NS as QDEC0,
+            PWM2_NS as PWM2,
-        QDEC1_NS as QDEC1,
+            PWM3_NS as PWM3,
-        QSPI_NS as QSPI,
+            QDEC0_NS as QDEC0,
-        REGULATORS_NS as REGULATORS,
+            QDEC1_NS as QDEC1,
-        RESET_NS as RESET,
+            QSPI_NS as QSPI,
-        RTC0_NS as RTC0,
+            REGULATORS_NS as REGULATORS,
-        RTC1_NS as RTC1,
+            RESET_NS as RESET,
-        SAADC_NS as SAADC,
+            RTC0_NS as RTC0,
-        SPIM0_NS as SPIM0,
+            RTC1_NS as RTC1,
-        SPIM1_NS as SPIM1,
+            SAADC_NS as SAADC,
-        SPIM2_NS as SPIM2,
+            SPIM0_NS as SPIM0,
-        SPIM3_NS as SPIM3,
+            SPIM1_NS as SPIM1,
-        SPIM4_NS as SPIM4,
+            SPIM2_NS as SPIM2,
-        SPIS0_NS as SPIS0,
+            SPIM3_NS as SPIM3,
-        SPIS1_NS as SPIS1,
+            SPIM4_NS as SPIM4,
-        SPIS2_NS as SPIS2,
+            SPIS0_NS as SPIS0,
-        SPIS3_NS as SPIS3,
+            SPIS1_NS as SPIS1,
-        TIMER0_NS as TIMER0,
+            SPIS2_NS as SPIS2,
-        TIMER1_NS as TIMER1,
+            SPIS3_NS as SPIS3,
-        TIMER2_NS as TIMER2,
+            TIMER0_NS as TIMER0,
-        TWIM0_NS as TWIM0,
+            TIMER1_NS as TIMER1,
-        TWIM1_NS as TWIM1,
+            TIMER2_NS as TIMER2,
-        TWIM2_NS as TWIM2,
+            TWIM0_NS as TWIM0,
-        TWIM3_NS as TWIM3,
+            TWIM1_NS as TWIM1,
-        TWIS0_NS as TWIS0,
+            TWIM2_NS as TWIM2,
-        TWIS1_NS as TWIS1,
+            TWIM3_NS as TWIM3,
-        TWIS2_NS as TWIS2,
+            TWIS0_NS as TWIS0,
-        TWIS3_NS as TWIS3,
+            TWIS1_NS as TWIS1,
-        UARTE0_NS as UARTE0,
+            TWIS2_NS as TWIS2,
-        UARTE1_NS as UARTE1,
+            TWIS3_NS as TWIS3,
-        UARTE2_NS as UARTE2,
+            UARTE0_NS as UARTE0,
-        UARTE3_NS as UARTE3,
+            UARTE1_NS as UARTE1,
-        USBD_NS as USBD,
+            UARTE2_NS as UARTE2,
-        USBREGULATOR_NS as USBREGULATOR,
+            UARTE3_NS as UARTE3,
-        VMC_NS as VMC,
+            USBD_NS as USBD,
-        WDT0_NS as WDT0,
+            USBREGULATOR_NS as USBREGULATOR,
-        WDT1_NS as WDT1,
+            VMC_NS as VMC,
-    };
+            WDT0_NS as WDT0,
+            WDT1_NS as WDT1,
+        };
+    }
 
-    #[cfg(feature = "nrf5340-app-s")]
+    /// Secure mode (S) peripherals
-    #[doc(no_inline)]
+    pub mod s {
-    pub use nrf5340_app_pac::{
+        #[cfg(feature = "nrf5340-app-s")]
-        CACHEDATA_S as CACHEDATA,
+        #[doc(no_inline)]
-        CACHEINFO_S as CACHEINFO,
+        pub use nrf5340_app_pac::{
-        CACHE_S as CACHE,
+            CACHEDATA_S as CACHEDATA,
-        CLOCK_S as CLOCK,
+            CACHEINFO_S as CACHEINFO,
-        COMP_S as COMP,
+            CACHE_S as CACHE,
-        CRYPTOCELL_S as CRYPTOCELL,
+            CLOCK_S as CLOCK,
-        CTI_S as CTI,
+            COMP_S as COMP,
-        CTRLAP_S as CTRLAP,
+            CRYPTOCELL_S as CRYPTOCELL,
-        DCNF_S as DCNF,
+            CTI_S as CTI,
-        DPPIC_S as DPPIC,
+            CTRLAP_S as CTRLAP,
-        EGU0_S as EGU0,
+            DCNF_S as DCNF,
-        EGU1_S as EGU1,
+            DPPIC_S as DPPIC,
-        EGU2_S as EGU2,
+            EGU0_S as EGU0,
-        EGU3_S as EGU3,
+            EGU1_S as EGU1,
-        EGU4_S as EGU4,
+            EGU2_S as EGU2,
-        EGU5_S as EGU5,
+            EGU3_S as EGU3,
-        FICR_S as FICR,
+            EGU4_S as EGU4,
-        FPU_S as FPU,
+            EGU5_S as EGU5,
-        GPIOTE0_S as GPIOTE0,
+            FICR_S as FICR,
-        I2S0_S as I2S0,
+            FPU_S as FPU,
-        IPC_S as IPC,
+            GPIOTE0_S as GPIOTE0,
-        KMU_S as KMU,
+            I2S0_S as I2S0,
-        LPCOMP_S as LPCOMP,
+            IPC_S as IPC,
-        MUTEX_S as MUTEX,
+            KMU_S as KMU,
-        NFCT_S as NFCT,
+            LPCOMP_S as LPCOMP,
-        NVMC_S as NVMC,
+            MUTEX_S as MUTEX,
-        OSCILLATORS_S as OSCILLATORS,
+            NFCT_S as NFCT,
-        P0_S as P0,
+            NVMC_S as NVMC,
-        P1_S as P1,
+            OSCILLATORS_S as OSCILLATORS,
-        PDM0_S as PDM0,
+            P0_S as P0,
-        POWER_S as POWER,
+            P1_S as P1,
-        PWM0_S as PWM0,
+            PDM0_S as PDM0,
-        PWM1_S as PWM1,
+            POWER_S as POWER,
-        PWM2_S as PWM2,
+            PWM0_S as PWM0,
-        PWM3_S as PWM3,
+            PWM1_S as PWM1,
-        QDEC0_S as QDEC0,
+            PWM2_S as PWM2,
-        QDEC1_S as QDEC1,
+            PWM3_S as PWM3,
-        QSPI_S as QSPI,
+            QDEC0_S as QDEC0,
-        REGULATORS_S as REGULATORS,
+            QDEC1_S as QDEC1,
-        RESET_S as RESET,
+            QSPI_S as QSPI,
-        RTC0_S as RTC0,
+            REGULATORS_S as REGULATORS,
-        RTC1_S as RTC1,
+            RESET_S as RESET,
-        SAADC_S as SAADC,
+            RTC0_S as RTC0,
-        SPIM0_S as SPIM0,
+            RTC1_S as RTC1,
-        SPIM1_S as SPIM1,
+            SAADC_S as SAADC,
-        SPIM2_S as SPIM2,
+            SPIM0_S as SPIM0,
-        SPIM3_S as SPIM3,
+            SPIM1_S as SPIM1,
-        SPIM4_S as SPIM4,
+            SPIM2_S as SPIM2,
-        SPIS0_S as SPIS0,
+            SPIM3_S as SPIM3,
-        SPIS1_S as SPIS1,
+            SPIM4_S as SPIM4,
-        SPIS2_S as SPIS2,
+            SPIS0_S as SPIS0,
-        SPIS3_S as SPIS3,
+            SPIS1_S as SPIS1,
-        SPU_S as SPU,
+            SPIS2_S as SPIS2,
-        TAD_S as TAD,
+            SPIS3_S as SPIS3,
-        TIMER0_S as TIMER0,
+            SPU_S as SPU,
-        TIMER1_S as TIMER1,
+            TAD_S as TAD,
-        TIMER2_S as TIMER2,
+            TIMER0_S as TIMER0,
-        TWIM0_S as TWIM0,
+            TIMER1_S as TIMER1,
-        TWIM1_S as TWIM1,
+            TIMER2_S as TIMER2,
-        TWIM2_S as TWIM2,
+            TWIM0_S as TWIM0,
-        TWIM3_S as TWIM3,
+            TWIM1_S as TWIM1,
-        TWIS0_S as TWIS0,
+            TWIM2_S as TWIM2,
-        TWIS1_S as TWIS1,
+            TWIM3_S as TWIM3,
-        TWIS2_S as TWIS2,
+            TWIS0_S as TWIS0,
-        TWIS3_S as TWIS3,
+            TWIS1_S as TWIS1,
-        UARTE0_S as UARTE0,
+            TWIS2_S as TWIS2,
-        UARTE1_S as UARTE1,
+            TWIS3_S as TWIS3,
-        UARTE2_S as UARTE2,
+            UARTE0_S as UARTE0,
-        UARTE3_S as UARTE3,
+            UARTE1_S as UARTE1,
-        UICR_S as UICR,
+            UARTE2_S as UARTE2,
-        USBD_S as USBD,
+            UARTE3_S as UARTE3,
-        USBREGULATOR_S as USBREGULATOR,
+            UICR_S as UICR,
-        VMC_S as VMC,
+            USBD_S as USBD,
-        WDT0_S as WDT0,
+            USBREGULATOR_S as USBREGULATOR,
-        WDT1_S as WDT1,
+            VMC_S as VMC,
-    };
+            WDT0_S as WDT0,
+            WDT1_S as WDT1,
+        };
+    }
+
+    #[cfg(feature = "_ns")]
+    pub use ns::*;
+    #[cfg(feature = "_s")]
+    pub use s::*;
 }
 
 /// The maximum buffer size that the EasyDMA can send/recv in one operation.

embassy-nrf/src/chips/nrf5340_net.rs

@@ -7,9 +7,12 @@ pub mod pac {
 
     pub use nrf5340_net_pac::NVIC_PRIO_BITS;
 
+    #[cfg(feature="rt")]
+    #[doc(no_inline)]
+    pub use nrf5340_net_pac::interrupt;
+
     #[doc(no_inline)]
     pub use nrf5340_net_pac::{
-        interrupt,
         Interrupt,
         Peripherals,
 

embassy-nrf/src/chips/nrf9160.rs

@@ -7,9 +7,12 @@ pub mod pac {
 
     pub use nrf9160_pac::NVIC_PRIO_BITS;
 
+    #[cfg(feature="rt")]
+    #[doc(no_inline)]
+    pub use nrf9160_pac::interrupt;
+
     #[doc(no_inline)]
     pub use nrf9160_pac::{
-        interrupt,
         Interrupt,
 
         cc_host_rgf_s as cc_host_rgf,
@@ -45,122 +48,131 @@ pub mod pac {
         wdt_ns as wdt,
     };
     
-    #[cfg(feature = "nrf9160-ns")]
+    /// Non-Secure mode (NS) peripherals
-    #[doc(no_inline)]
+    pub mod ns {
-    pub use nrf9160_pac::{
+        #[doc(no_inline)]
-        CLOCK_NS as CLOCK,
+        pub use nrf9160_pac::{
-        DPPIC_NS as DPPIC,
+            CLOCK_NS as CLOCK,
-        EGU0_NS as EGU0,
+            DPPIC_NS as DPPIC,
-        EGU1_NS as EGU1,
+            EGU0_NS as EGU0,
-        EGU2_NS as EGU2,
+            EGU1_NS as EGU1,
-        EGU3_NS as EGU3,
+            EGU2_NS as EGU2,
-        EGU4_NS as EGU4,
+            EGU3_NS as EGU3,
-        EGU5_NS as EGU5,
+            EGU4_NS as EGU4,
-        FPU_NS as FPU,
+            EGU5_NS as EGU5,
-        GPIOTE1_NS as GPIOTE1,
+            FPU_NS as FPU,
-        I2S_NS as I2S,
+            GPIOTE1_NS as GPIOTE1,
-        IPC_NS as IPC,
+            I2S_NS as I2S,
-        KMU_NS as KMU,
+            IPC_NS as IPC,
-        NVMC_NS as NVMC,
+            KMU_NS as KMU,
-        P0_NS as P0,
+            NVMC_NS as NVMC,
-        PDM_NS as PDM,
+            P0_NS as P0,
-        POWER_NS as POWER,
+            PDM_NS as PDM,
-        PWM0_NS as PWM0,
+            POWER_NS as POWER,
-        PWM1_NS as PWM1,
+            PWM0_NS as PWM0,
-        PWM2_NS as PWM2,
+            PWM1_NS as PWM1,
-        PWM3_NS as PWM3,
+            PWM2_NS as PWM2,
-        REGULATORS_NS as REGULATORS,
+            PWM3_NS as PWM3,
-        RTC0_NS as RTC0,
+            REGULATORS_NS as REGULATORS,
-        RTC1_NS as RTC1,
+            RTC0_NS as RTC0,
-        SAADC_NS as SAADC,
+            RTC1_NS as RTC1,
-        SPIM0_NS as SPIM0,
+            SAADC_NS as SAADC,
-        SPIM1_NS as SPIM1,
+            SPIM0_NS as SPIM0,
-        SPIM2_NS as SPIM2,
+            SPIM1_NS as SPIM1,
-        SPIM3_NS as SPIM3,
+            SPIM2_NS as SPIM2,
-        SPIS0_NS as SPIS0,
+            SPIM3_NS as SPIM3,
-        SPIS1_NS as SPIS1,
+            SPIS0_NS as SPIS0,
-        SPIS2_NS as SPIS2,
+            SPIS1_NS as SPIS1,
-        SPIS3_NS as SPIS3,
+            SPIS2_NS as SPIS2,
-        TIMER0_NS as TIMER0,
+            SPIS3_NS as SPIS3,
-        TIMER1_NS as TIMER1,
+            TIMER0_NS as TIMER0,
-        TIMER2_NS as TIMER2,
+            TIMER1_NS as TIMER1,
-        TWIM0_NS as TWIM0,
+            TIMER2_NS as TIMER2,
-        TWIM1_NS as TWIM1,
+            TWIM0_NS as TWIM0,
-        TWIM2_NS as TWIM2,
+            TWIM1_NS as TWIM1,
-        TWIM3_NS as TWIM3,
+            TWIM2_NS as TWIM2,
-        TWIS0_NS as TWIS0,
+            TWIM3_NS as TWIM3,
-        TWIS1_NS as TWIS1,
+            TWIS0_NS as TWIS0,
-        TWIS2_NS as TWIS2,
+            TWIS1_NS as TWIS1,
-        TWIS3_NS as TWIS3,
+            TWIS2_NS as TWIS2,
-        UARTE0_NS as UARTE0,
+            TWIS3_NS as TWIS3,
-        UARTE1_NS as UARTE1,
+            UARTE0_NS as UARTE0,
-        UARTE2_NS as UARTE2,
+            UARTE1_NS as UARTE1,
-        UARTE3_NS as UARTE3,
+            UARTE2_NS as UARTE2,
-        VMC_NS as VMC,
+            UARTE3_NS as UARTE3,
-        WDT_NS as WDT,
+            VMC_NS as VMC,
-    };
+            WDT_NS as WDT,
+        };
+    }
 
-    #[cfg(feature = "nrf9160-s")]
+    /// Secure mode (S) peripherals
-    #[doc(no_inline)]
+    pub mod s {
-    pub use nrf9160_pac::{
+        #[doc(no_inline)]
-        CC_HOST_RGF_S as CC_HOST_RGF,
+        pub use nrf9160_pac::{
-        CLOCK_S as CLOCK,
+            CC_HOST_RGF_S as CC_HOST_RGF,
-        CRYPTOCELL_S as CRYPTOCELL,
+            CLOCK_S as CLOCK,
-        CTRL_AP_PERI_S as CTRL_AP_PERI,
+            CRYPTOCELL_S as CRYPTOCELL,
-        DPPIC_S as DPPIC,
+            CTRL_AP_PERI_S as CTRL_AP_PERI,
-        EGU0_S as EGU0,
+            DPPIC_S as DPPIC,
-        EGU1_S as EGU1,
+            EGU0_S as EGU0,
-        EGU2_S as EGU2,
+            EGU1_S as EGU1,
-        EGU3_S as EGU3,
+            EGU2_S as EGU2,
-        EGU4_S as EGU4,
+            EGU3_S as EGU3,
-        EGU5_S as EGU5,
+            EGU4_S as EGU4,
-        FICR_S as FICR,
+            EGU5_S as EGU5,
-        FPU_S as FPU,
+            FICR_S as FICR,
-        GPIOTE0_S as GPIOTE0,
+            FPU_S as FPU,
-        I2S_S as I2S,
+            GPIOTE0_S as GPIOTE0,
-        IPC_S as IPC,
+            I2S_S as I2S,
-        KMU_S as KMU,
+            IPC_S as IPC,
-        NVMC_S as NVMC,
+            KMU_S as KMU,
-        P0_S as P0,
+            NVMC_S as NVMC,
-        PDM_S as PDM,
+            P0_S as P0,
-        POWER_S as POWER,
+            PDM_S as PDM,
-        PWM0_S as PWM0,
+            POWER_S as POWER,
-        PWM1_S as PWM1,
+            PWM0_S as PWM0,
-        PWM2_S as PWM2,
+            PWM1_S as PWM1,
-        PWM3_S as PWM3,
+            PWM2_S as PWM2,
-        REGULATORS_S as REGULATORS,
+            PWM3_S as PWM3,
-        RTC0_S as RTC0,
+            REGULATORS_S as REGULATORS,
-        RTC1_S as RTC1,
+            RTC0_S as RTC0,
-        SAADC_S as SAADC,
+            RTC1_S as RTC1,
-        SPIM0_S as SPIM0,
+            SAADC_S as SAADC,
-        SPIM1_S as SPIM1,
+            SPIM0_S as SPIM0,
-        SPIM2_S as SPIM2,
+            SPIM1_S as SPIM1,
-        SPIM3_S as SPIM3,
+            SPIM2_S as SPIM2,
-        SPIS0_S as SPIS0,
+            SPIM3_S as SPIM3,
-        SPIS1_S as SPIS1,
+            SPIS0_S as SPIS0,
-        SPIS2_S as SPIS2,
+            SPIS1_S as SPIS1,
-        SPIS3_S as SPIS3,
+            SPIS2_S as SPIS2,
-        SPU_S as SPU,
+            SPIS3_S as SPIS3,
-        TAD_S as TAD,
+            SPU_S as SPU,
-        TIMER0_S as TIMER0,
+            TAD_S as TAD,
-        TIMER1_S as TIMER1,
+            TIMER0_S as TIMER0,
-        TIMER2_S as TIMER2,
+            TIMER1_S as TIMER1,
-        TWIM0_S as TWIM0,
+            TIMER2_S as TIMER2,
-        TWIM1_S as TWIM1,
+            TWIM0_S as TWIM0,
-        TWIM2_S as TWIM2,
+            TWIM1_S as TWIM1,
-        TWIM3_S as TWIM3,
+            TWIM2_S as TWIM2,
-        TWIS0_S as TWIS0,
+            TWIM3_S as TWIM3,
-        TWIS1_S as TWIS1,
+            TWIS0_S as TWIS0,
-        TWIS2_S as TWIS2,
+            TWIS1_S as TWIS1,
-        TWIS3_S as TWIS3,
+            TWIS2_S as TWIS2,
-        UARTE0_S as UARTE0,
+            TWIS3_S as TWIS3,
-        UARTE1_S as UARTE1,
+            UARTE0_S as UARTE0,
-        UARTE2_S as UARTE2,
+            UARTE1_S as UARTE1,
-        UARTE3_S as UARTE3,
+            UARTE2_S as UARTE2,
-        UICR_S as UICR,
+            UARTE3_S as UARTE3,
-        VMC_S as VMC,
+            UICR_S as UICR,
-        WDT_S as WDT,
+            VMC_S as VMC,
-    };
+            WDT_S as WDT,
+        };
+    }
+
+    #[cfg(feature = "_ns")]
+    pub use ns::*;
+    #[cfg(feature = "_s")]
+    pub use s::*;
 }
 
 /// The maximum buffer size that the EasyDMA can send/recv in one operation.

embassy-nrf/src/lib.rs

@@ -1,5 +1,6 @@
 #![no_std]
 #![cfg_attr(feature = "nightly", feature(async_fn_in_trait, impl_trait_projections))]
+#![cfg_attr(feature = "nightly", allow(stable_features, unknown_lints, async_fn_in_trait))]
 #![doc = include_str!("../README.md")]
 #![warn(missing_docs)]
 
@@ -102,6 +103,7 @@ mod chip;
 #[macro_export]
 macro_rules! bind_interrupts {
         ($vis:vis struct $name:ident { $($irq:ident => $($handler:ty),*;)* }) => {
+            #[derive(Copy, Clone)]
             $vis struct $name;
 
             $(

embassy-nrf/src/pdm.rs

@@ -2,6 +2,7 @@
 
 #![macro_use]
 
+use core::future::poll_fn;
 use core::marker::PhantomData;
 use core::sync::atomic::{compiler_fence, Ordering};
 use core::task::Poll;
@@ -9,7 +10,6 @@ use core::task::Poll;
 use embassy_hal_internal::drop::OnDrop;
 use embassy_hal_internal::{into_ref, PeripheralRef};
 use fixed::types::I7F1;
-use futures::future::poll_fn;
 
 use crate::chip::EASY_DMA_SIZE;
 use crate::gpio::sealed::Pin;

embassy-nrf/src/spim.rs

@@ -68,30 +68,14 @@ impl<T: Instance> interrupt::typelevel::Handler<T::Interrupt> for InterruptHandl
         let r = T::regs();
         let s = T::state();
 
-        #[cfg(feature = "nrf52832")]
+        #[cfg(feature = "_nrf52832_anomaly_109")]
-        // NRF32 Anomaly 109 workaround... NRF52832
+        if r.events_started.read().bits() != 0 {
-        if r.intenset.read().started().is_enabled() && r.events_started.read().bits() != 0 {
+            s.waker.wake();
-            // Handle the first "fake" transmission
-            r.events_started.reset();
-            r.events_end.reset();
-
-            // Update DMA registers with correct rx/tx buffer sizes
-            r.rxd
-                .maxcnt
-                .write(|w| unsafe { w.maxcnt().bits(s.rx.load(Ordering::Relaxed)) });
-            r.txd
-                .maxcnt
-                .write(|w| unsafe { w.maxcnt().bits(s.tx.load(Ordering::Relaxed)) });
-
-            // Disable interrupt for STARTED event...
             r.intenclr.write(|w| w.started().clear());
-            // ... and start actual, hopefully glitch-free transmission
-            r.tasks_start.write(|w| unsafe { w.bits(1) });
-            return;
         }
 
         if r.events_end.read().bits() != 0 {
-            s.end_waker.wake();
+            s.waker.wake();
             r.intenclr.write(|w| w.end().clear());
         }
     }
@@ -192,7 +176,7 @@ impl<'d, T: Instance> Spim<'d, T> {
         let mut spim = Self { _p: spim };
 
         // Apply runtime peripheral configuration
-        Self::set_config(&mut spim, &config);
+        Self::set_config(&mut spim, &config).unwrap();
 
         // Disable all events interrupts
         r.intenclr.write(|w| unsafe { w.bits(0xFFFF_FFFF) });
@@ -222,8 +206,7 @@ impl<'d, T: Instance> Spim<'d, T> {
         r.rxd.ptr.write(|w| unsafe { w.ptr().bits(ptr as _) });
         r.rxd.maxcnt.write(|w| unsafe { w.maxcnt().bits(rx_len as _) });
 
-        // ANOMALY 109 workaround
+        #[cfg(feature = "_nrf52832_anomaly_109")]
-        #[cfg(feature = "nrf52832")]
         {
             let s = T::state();
 
@@ -254,6 +237,9 @@ impl<'d, T: Instance> Spim<'d, T> {
     fn blocking_inner_from_ram(&mut self, rx: *mut [u8], tx: *const [u8]) -> Result<(), Error> {
         self.prepare(rx, tx)?;
 
+        #[cfg(feature = "_nrf52832_anomaly_109")]
+        while let Poll::Pending = self.nrf52832_dma_workaround_status() {}
+
         // Wait for 'end' event.
         while T::regs().events_end.read().bits() == 0 {}
 
@@ -278,9 +264,19 @@ impl<'d, T: Instance> Spim<'d, T> {
     async fn async_inner_from_ram(&mut self, rx: *mut [u8], tx: *const [u8]) -> Result<(), Error> {
         self.prepare(rx, tx)?;
 
+        #[cfg(feature = "_nrf52832_anomaly_109")]
+        poll_fn(|cx| {
+            let s = T::state();
+
+            s.waker.register(cx.waker());
+
+            self.nrf52832_dma_workaround_status()
+        })
+        .await;
+
         // Wait for 'end' event.
         poll_fn(|cx| {
-            T::state().end_waker.register(cx.waker());
+            T::state().waker.register(cx.waker());
             if T::regs().events_end.read().bits() != 0 {
                 return Poll::Ready(());
             }
@@ -371,6 +367,32 @@ impl<'d, T: Instance> Spim<'d, T> {
     pub async fn write_from_ram(&mut self, data: &[u8]) -> Result<(), Error> {
         self.async_inner_from_ram(&mut [], data).await
     }
+
+    #[cfg(feature = "_nrf52832_anomaly_109")]
+    fn nrf52832_dma_workaround_status(&mut self) -> Poll<()> {
+        let r = T::regs();
+        if r.events_started.read().bits() != 0 {
+            let s = T::state();
+
+            // Handle the first "fake" transmission
+            r.events_started.reset();
+            r.events_end.reset();
+
+            // Update DMA registers with correct rx/tx buffer sizes
+            r.rxd
+                .maxcnt
+                .write(|w| unsafe { w.maxcnt().bits(s.rx.load(Ordering::Relaxed)) });
+            r.txd
+                .maxcnt
+                .write(|w| unsafe { w.maxcnt().bits(s.tx.load(Ordering::Relaxed)) });
+
+            r.intenset.write(|w| w.end().set());
+            // ... and start actual, hopefully glitch-free transmission
+            r.tasks_start.write(|w| unsafe { w.bits(1) });
+            return Poll::Ready(());
+        }
+        Poll::Pending
+    }
 }
 
 impl<'d, T: Instance> Drop for Spim<'d, T> {
@@ -395,7 +417,7 @@ impl<'d, T: Instance> Drop for Spim<'d, T> {
 }
 
 pub(crate) mod sealed {
-    #[cfg(feature = "nrf52832")]
+    #[cfg(feature = "_nrf52832_anomaly_109")]
     use core::sync::atomic::AtomicU8;
 
     use embassy_sync::waitqueue::AtomicWaker;
@@ -403,20 +425,20 @@ pub(crate) mod sealed {
     use super::*;
 
     pub struct State {
-        pub end_waker: AtomicWaker,
+        pub waker: AtomicWaker,
-        #[cfg(feature = "nrf52832")]
+        #[cfg(feature = "_nrf52832_anomaly_109")]
         pub rx: AtomicU8,
-        #[cfg(feature = "nrf52832")]
+        #[cfg(feature = "_nrf52832_anomaly_109")]
         pub tx: AtomicU8,
     }
 
     impl State {
         pub const fn new() -> Self {
             Self {
-                end_waker: AtomicWaker::new(),
+                waker: AtomicWaker::new(),
-                #[cfg(feature = "nrf52832")]
+                #[cfg(feature = "_nrf52832_anomaly_109")]
                 rx: AtomicU8::new(0),
-                #[cfg(feature = "nrf52832")]
+                #[cfg(feature = "_nrf52832_anomaly_109")]
                 tx: AtomicU8::new(0),
             }
         }
@@ -544,7 +566,8 @@ mod eha {
 
 impl<'d, T: Instance> SetConfig for Spim<'d, T> {
     type Config = Config;
-    fn set_config(&mut self, config: &Self::Config) {
+    type ConfigError = ();
+    fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError> {
         let r = T::regs();
         // Configure mode.
         let mode = config.mode;
@@ -582,5 +605,7 @@ impl<'d, T: Instance> SetConfig for Spim<'d, T> {
         // Set over-read character
         let orc = config.orc;
         r.orc.write(|w| unsafe { w.orc().bits(orc) });
+
+        Ok(())
     }
 }

embassy-nrf/src/spis.rs

@@ -172,7 +172,7 @@ impl<'d, T: Instance> Spis<'d, T> {
         let mut spis = Self { _p: spis };
 
         // Apply runtime peripheral configuration
-        Self::set_config(&mut spis, &config);
+        Self::set_config(&mut spis, &config).unwrap();
 
         // Disable all events interrupts.
         r.intenclr.write(|w| unsafe { w.bits(0xFFFF_FFFF) });
@@ -467,7 +467,8 @@ macro_rules! impl_spis {
 
 impl<'d, T: Instance> SetConfig for Spis<'d, T> {
     type Config = Config;
-    fn set_config(&mut self, config: &Self::Config) {
+    type ConfigError = ();
+    fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError> {
         let r = T::regs();
         // Configure mode.
         let mode = config.mode;
@@ -509,5 +510,7 @@ impl<'d, T: Instance> SetConfig for Spis<'d, T> {
         // Configure auto-acquire on 'transfer end' event.
         let auto_acquire = config.auto_acquire;
         r.shorts.write(|w| w.end_acquire().bit(auto_acquire));
+
+        Ok(())
     }
 }

embassy-nrf/src/twim.rs

@@ -170,7 +170,7 @@ impl<'d, T: Instance> Twim<'d, T> {
         let mut twim = Self { _p: twim };
 
         // Apply runtime peripheral configuration
-        Self::set_config(&mut twim, &config);
+        Self::set_config(&mut twim, &config).unwrap();
 
         // Disable all events interrupts
         r.intenclr.write(|w| unsafe { w.bits(0xFFFF_FFFF) });
@@ -890,9 +890,12 @@ mod eha {
 
 impl<'d, T: Instance> SetConfig for Twim<'d, T> {
     type Config = Config;
-    fn set_config(&mut self, config: &Self::Config) {
+    type ConfigError = ();
+    fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError> {
         let r = T::regs();
         r.frequency
             .write(|w| unsafe { w.frequency().bits(config.frequency as u32) });
+
+        Ok(())
     }
 }

embassy-rp/Cargo.toml

@@ -59,8 +59,8 @@ nightly = ["embedded-hal-1", "embedded-hal-async", "embedded-storage-async", "em
 unstable-traits = ["embedded-hal-1", "embedded-hal-nb"]
 
 [dependencies]
-embassy-sync = { version = "0.3.0", path = "../embassy-sync" }
+embassy-sync = { version = "0.4.0", path = "../embassy-sync" }
-embassy-time = { version = "0.1.3", path = "../embassy-time", features = [ "tick-hz-1_000_000" ] }
+embassy-time = { version = "0.1.5", path = "../embassy-time", features = [ "tick-hz-1_000_000" ] }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }
 embassy-hal-internal = {version = "0.1.0", path = "../embassy-hal-internal", features = ["cortex-m", "prio-bits-2"] }
 embassy-embedded-hal = {version = "0.1.0", path = "../embassy-embedded-hal" }
@@ -75,8 +75,8 @@ cortex-m = "0.7.6"
 critical-section = "1.1"
 futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
 chrono = { version = "0.4", default-features = false, optional = true }
-embedded-io = { version = "0.5.0" }
+embedded-io = { version = "0.6.0" }
-embedded-io-async = { version = "0.5.0", optional = true }
+embedded-io-async = { version = "0.6.0", optional = true }
 embedded-storage = { version = "0.3" }
 embedded-storage-async = { version = "0.4.0", optional = true }
 rand_core = "0.6.4"
@@ -89,11 +89,10 @@ embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1", optional =
 embedded-hal-async = { version = "=1.0.0-rc.1", optional = true}
 embedded-hal-nb = { version = "=1.0.0-rc.1", optional = true}
 
-paste = "1.0"
 pio-proc = {version= "0.2" }
 pio = {version= "0.2.1" }
 rp2040-boot2 = "0.3"
 
 [dev-dependencies]
-embassy-executor = { version = "0.3.0", path = "../embassy-executor", features = ["nightly", "arch-std", "executor-thread"] }
+embassy-executor = { version = "0.3.1", path = "../embassy-executor", features = ["nightly", "arch-std", "executor-thread"] }
-static_cell = "1.1"
+static_cell = { version = "2" }

embassy-rp/src/adc.rs

@@ -213,6 +213,7 @@ impl<'d> Adc<'d, Async> {
         ch: &mut Channel<'_>,
         buf: &mut [W],
         fcs_err: bool,
+        div: u16,
         dma: impl Peripheral<P = impl dma::Channel>,
     ) -> Result<(), Error> {
         let r = Self::regs();
@@ -258,6 +259,7 @@ impl<'d> Adc<'d, Async> {
         // start conversions and wait for dma to finish. we can't report errors early
         // because there's no interrupt to signal them, and inspecting every element
         // of the fifo is too costly to do here.
+        r.div().write_set(|w| w.set_int(div));
         r.cs().write_set(|w| w.set_start_many(true));
         dma.await;
         mem::drop(auto_reset);
@@ -275,9 +277,10 @@ impl<'d> Adc<'d, Async> {
         &mut self,
         ch: &mut Channel<'_>,
         buf: &mut [S],
+        div: u16,
         dma: impl Peripheral<P = impl dma::Channel>,
     ) -> Result<(), Error> {
-        self.read_many_inner(ch, buf, false, dma).await
+        self.read_many_inner(ch, buf, false, div, dma).await
     }
 
     #[inline]
@@ -285,11 +288,12 @@ impl<'d> Adc<'d, Async> {
         &mut self,
         ch: &mut Channel<'_>,
         buf: &mut [Sample],
+        div: u16,
         dma: impl Peripheral<P = impl dma::Channel>,
     ) {
         // errors are reported in individual samples
         let _ = self
-            .read_many_inner(ch, unsafe { mem::transmute::<_, &mut [u16]>(buf) }, true, dma)
+            .read_many_inner(ch, unsafe { mem::transmute::<_, &mut [u16]>(buf) }, true, div, dma)
             .await;
     }
 }

embassy-rp/src/bootsel.rs

@@ -0,0 +1,83 @@
+//! Boot Select button
+//!
+//! The RP2040 rom supports a BOOTSEL button that is used to enter the USB bootloader
+//! if held during reset. To avoid wasting GPIO pins, the button is multiplexed onto
+//! the CS pin of the QSPI flash, but that makes it somewhat expensive and complicated
+//! to utilize outside of the rom's bootloader.
+//!
+//! This module provides functionality to poll BOOTSEL from an embassy application.
+
+use crate::flash::in_ram;
+
+impl crate::peripherals::BOOTSEL {
+    /// Polls the BOOTSEL button. Returns true if the button is pressed.
+    ///
+    /// Polling isn't cheap, as this function waits for core 1 to finish it's current
+    /// task and for any DMAs from flash to complete
+    pub fn is_pressed(&mut self) -> bool {
+        let mut cs_status = Default::default();
+
+        unsafe { in_ram(|| cs_status = ram_helpers::read_cs_status()) }.expect("Must be called from Core 0");
+
+        // bootsel is active low, so invert
+        !cs_status.infrompad()
+    }
+}
+
+mod ram_helpers {
+    use rp_pac::io::regs::GpioStatus;
+
+    /// Temporally reconfigures the CS gpio and returns the GpioStatus.
+
+    /// This function runs from RAM so it can disable flash XIP.
+    ///
+    /// # Safety
+    ///
+    /// The caller must ensure flash is idle and will remain idle.
+    /// This function must live in ram. It uses inline asm to avoid any
+    /// potential calls to ABI functions that might be in flash.
+    #[inline(never)]
+    #[link_section = ".data.ram_func"]
+    #[cfg(target_arch = "arm")]
+    pub unsafe fn read_cs_status() -> GpioStatus {
+        let result: u32;
+
+        // Magic value, used as both OEOVER::DISABLE and delay loop counter
+        let magic = 0x2000;
+
+        core::arch::asm!(
+            ".equiv GPIO_STATUS, 0x0",
+            ".equiv GPIO_CTRL,   0x4",
+
+            "ldr {orig_ctrl}, [{cs_gpio}, $GPIO_CTRL]",
+
+            // The BOOTSEL pulls the flash's CS line low though a 1K resistor.
+            // this is weak enough to avoid disrupting normal operation.
+            // But, if we disable CS's output drive and allow it to float...
+            "str {val}, [{cs_gpio}, $GPIO_CTRL]",
+
+            // ...then wait for the state to settle...
+            "1:", // ~4000 cycle delay loop
+            "subs {val}, #8",
+            "bne 1b",
+
+            // ...we can read the current state of bootsel
+            "ldr {val}, [{cs_gpio}, $GPIO_STATUS]",
+
+            // Finally, restore CS to normal operation so XIP can continue
+            "str {orig_ctrl}, [{cs_gpio}, $GPIO_CTRL]",
+
+            cs_gpio = in(reg) rp_pac::IO_QSPI.gpio(1).as_ptr(),
+            orig_ctrl = out(reg) _,
+            val = inout(reg) magic => result,
+            options(nostack),
+        );
+
+        core::mem::transmute(result)
+    }
+
+    #[cfg(not(target_arch = "arm"))]
+    pub unsafe fn read_cs_status() -> GpioStatus {
+        unimplemented!()
+    }
+}

embassy-rp/src/flash.rs

@@ -131,7 +131,7 @@ impl<'d, T: Instance, M: Mode, const FLASH_SIZE: usize> Flash<'d, T, M, FLASH_SI
 
         let len = to - from;
 
-        unsafe { self.in_ram(|| ram_helpers::flash_range_erase(from, len))? };
+        unsafe { in_ram(|| ram_helpers::flash_range_erase(from, len))? };
 
         Ok(())
     }
@@ -156,7 +156,7 @@ impl<'d, T: Instance, M: Mode, const FLASH_SIZE: usize> Flash<'d, T, M, FLASH_SI
 
             let unaligned_offset = offset as usize - start;
 
-            unsafe { self.in_ram(|| ram_helpers::flash_range_program(unaligned_offset as u32, &pad_buf))? }
+            unsafe { in_ram(|| ram_helpers::flash_range_program(unaligned_offset as u32, &pad_buf))? }
         }
 
         let remaining_len = bytes.len() - start_padding;
@@ -174,12 +174,12 @@ impl<'d, T: Instance, M: Mode, const FLASH_SIZE: usize> Flash<'d, T, M, FLASH_SI
             if bytes.as_ptr() as usize >= 0x2000_0000 {
                 let aligned_data = &bytes[start_padding..end_padding];
 
-                unsafe { self.in_ram(|| ram_helpers::flash_range_program(aligned_offset as u32, aligned_data))? }
+                unsafe { in_ram(|| ram_helpers::flash_range_program(aligned_offset as u32, aligned_data))? }
             } else {
                 for chunk in bytes[start_padding..end_padding].chunks_exact(PAGE_SIZE) {
                     let mut ram_buf = [0xFF_u8; PAGE_SIZE];
                     ram_buf.copy_from_slice(chunk);
-                    unsafe { self.in_ram(|| ram_helpers::flash_range_program(aligned_offset as u32, &ram_buf))? }
+                    unsafe { in_ram(|| ram_helpers::flash_range_program(aligned_offset as u32, &ram_buf))? }
                     aligned_offset += PAGE_SIZE;
                 }
             }
@@ -194,47 +194,15 @@ impl<'d, T: Instance, M: Mode, const FLASH_SIZE: usize> Flash<'d, T, M, FLASH_SI
 
             let unaligned_offset = end_offset - (PAGE_SIZE - rem_offset);
 
-            unsafe { self.in_ram(|| ram_helpers::flash_range_program(unaligned_offset as u32, &pad_buf))? }
+            unsafe { in_ram(|| ram_helpers::flash_range_program(unaligned_offset as u32, &pad_buf))? }
         }
 
         Ok(())
     }
 
-    /// Make sure to uphold the contract points with rp2040-flash.
-    /// - interrupts must be disabled
-    /// - DMA must not access flash memory
-    unsafe fn in_ram(&mut self, operation: impl FnOnce()) -> Result<(), Error> {
-        // Make sure we're running on CORE0
-        let core_id: u32 = pac::SIO.cpuid().read();
-        if core_id != 0 {
-            return Err(Error::InvalidCore);
-        }
-
-        // Make sure CORE1 is paused during the entire duration of the RAM function
-        crate::multicore::pause_core1();
-
-        critical_section::with(|_| {
-            // Wait for all DMA channels in flash to finish before ram operation
-            const SRAM_LOWER: u32 = 0x2000_0000;
-            for n in 0..crate::dma::CHANNEL_COUNT {
-                let ch = crate::pac::DMA.ch(n);
-                while ch.read_addr().read() < SRAM_LOWER && ch.ctrl_trig().read().busy() {}
-            }
-            // Wait for completion of any background reads
-            while pac::XIP_CTRL.stream_ctr().read().0 > 0 {}
-
-            // Run our flash operation in RAM
-            operation();
-        });
-
-        // Resume CORE1 execution
-        crate::multicore::resume_core1();
-        Ok(())
-    }
-
     /// Read SPI flash unique ID
     pub fn blocking_unique_id(&mut self, uid: &mut [u8]) -> Result<(), Error> {
-        unsafe { self.in_ram(|| ram_helpers::flash_unique_id(uid))? };
+        unsafe { in_ram(|| ram_helpers::flash_unique_id(uid))? };
         Ok(())
     }
 
@@ -242,7 +210,7 @@ impl<'d, T: Instance, M: Mode, const FLASH_SIZE: usize> Flash<'d, T, M, FLASH_SI
     pub fn blocking_jedec_id(&mut self) -> Result<u32, Error> {
         let mut jedec = None;
         unsafe {
-            self.in_ram(|| {
+            in_ram(|| {
                 jedec.replace(ram_helpers::flash_jedec_id());
             })?;
         };
@@ -871,6 +839,38 @@ mod ram_helpers {
     }
 }
 
+/// Make sure to uphold the contract points with rp2040-flash.
+/// - interrupts must be disabled
+/// - DMA must not access flash memory
+pub(crate) unsafe fn in_ram(operation: impl FnOnce()) -> Result<(), Error> {
+    // Make sure we're running on CORE0
+    let core_id: u32 = pac::SIO.cpuid().read();
+    if core_id != 0 {
+        return Err(Error::InvalidCore);
+    }
+
+    // Make sure CORE1 is paused during the entire duration of the RAM function
+    crate::multicore::pause_core1();
+
+    critical_section::with(|_| {
+        // Wait for all DMA channels in flash to finish before ram operation
+        const SRAM_LOWER: u32 = 0x2000_0000;
+        for n in 0..crate::dma::CHANNEL_COUNT {
+            let ch = crate::pac::DMA.ch(n);
+            while ch.read_addr().read() < SRAM_LOWER && ch.ctrl_trig().read().busy() {}
+        }
+        // Wait for completion of any background reads
+        while pac::XIP_CTRL.stream_ctr().read().0 > 0 {}
+
+        // Run our flash operation in RAM
+        operation();
+    });
+
+    // Resume CORE1 execution
+    crate::multicore::resume_core1();
+    Ok(())
+}
+
 mod sealed {
     pub trait Instance {}
     pub trait Mode {}

embassy-rp/src/gpio.rs

@@ -97,6 +97,12 @@ impl<'d, T: Pin> Input<'d, T> {
         Self { pin }
     }
 
+    /// Set the pin's Schmitt trigger.
+    #[inline]
+    pub fn set_schmitt(&mut self, enable: bool) {
+        self.pin.set_schmitt(enable)
+    }
+
     #[inline]
     pub fn is_high(&self) -> bool {
         self.pin.is_high()
@@ -216,7 +222,6 @@ fn IO_IRQ_QSPI() {
 #[must_use = "futures do nothing unless you `.await` or poll them"]
 struct InputFuture<'a, T: Pin> {
     pin: PeripheralRef<'a, T>,
-    level: InterruptTrigger,
 }
 
 impl<'d, T: Pin> InputFuture<'d, T> {
@@ -243,7 +248,6 @@ impl<'d, T: Pin> InputFuture<'d, T> {
             .inte((pin.pin() / 8) as usize)
             .write_set(|w| match level {
                 InterruptTrigger::LevelHigh => {
-                    trace!("InputFuture::new enable LevelHigh for pin {}", pin.pin());
                     w.set_level_high(pin_group, true);
                 }
                 InterruptTrigger::LevelLow => {
@@ -261,7 +265,7 @@ impl<'d, T: Pin> InputFuture<'d, T> {
                 }
             });
 
-        Self { pin, level }
+        Self { pin }
     }
 }
 
@@ -297,14 +301,8 @@ impl<'d, T: Pin> Future for InputFuture<'d, T> {
             && !inte.level_high(pin_group)
             && !inte.level_low(pin_group)
         {
-            trace!(
-                "{:?} for pin {} was cleared, return Poll::Ready",
-                self.level,
-                self.pin.pin()
-            );
             return Poll::Ready(());
         }
-        trace!("InputFuture::poll return Poll::Pending");
         Poll::Pending
     }
 }
@@ -326,6 +324,18 @@ impl<'d, T: Pin> Output<'d, T> {
         Self { pin }
     }
 
+    /// Set the pin's drive strength.
+    #[inline]
+    pub fn set_drive_strength(&mut self, strength: Drive) {
+        self.pin.set_drive_strength(strength)
+    }
+
+    // Set the pin's slew rate.
+    #[inline]
+    pub fn set_slew_rate(&mut self, slew_rate: SlewRate) {
+        self.pin.set_slew_rate(slew_rate)
+    }
+
     /// Set the output as high.
     #[inline]
     pub fn set_high(&mut self) {
@@ -386,6 +396,18 @@ impl<'d, T: Pin> OutputOpenDrain<'d, T> {
         Self { pin }
     }
 
+    /// Set the pin's drive strength.
+    #[inline]
+    pub fn set_drive_strength(&mut self, strength: Drive) {
+        self.pin.set_drive_strength(strength)
+    }
+
+    // Set the pin's slew rate.
+    #[inline]
+    pub fn set_slew_rate(&mut self, slew_rate: SlewRate) {
+        self.pin.set_slew_rate(slew_rate)
+    }
+
     /// Set the output as high.
     #[inline]
     pub fn set_high(&mut self) {
@@ -541,6 +563,14 @@ impl<'d, T: Pin> Flex<'d, T> {
         });
     }
 
+    /// Set the pin's Schmitt trigger.
+    #[inline]
+    pub fn set_schmitt(&mut self, enable: bool) {
+        self.pin.pad_ctrl().modify(|w| {
+            w.set_schmitt(enable);
+        });
+    }
+
     /// Put the pin into input mode.
     ///
     /// The pull setting is left unchanged.

embassy-rp/src/i2c.rs

@@ -6,13 +6,12 @@ use embassy_hal_internal::{into_ref, PeripheralRef};
 use embassy_sync::waitqueue::AtomicWaker;
 use pac::i2c;
 
-use crate::gpio::sealed::Pin;
 use crate::gpio::AnyPin;
 use crate::interrupt::typelevel::{Binding, Interrupt};
 use crate::{interrupt, pac, peripherals, Peripheral};
 
 /// I2C error abort reason
-#[derive(Debug)]
+#[derive(Debug, PartialEq, Eq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum AbortReason {
     /// A bus operation was not acknowledged, e.g. due to the addressed device
@@ -27,7 +26,7 @@ pub enum AbortReason {
 }
 
 /// I2C error
-#[derive(Debug)]
+#[derive(Debug, PartialEq, Eq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum Error {
     /// I2C abort with error
@@ -295,13 +294,24 @@ impl<'d, T: Instance> I2c<'d, T, Async> {
 
     pub async fn read_async(&mut self, addr: u16, buffer: &mut [u8]) -> Result<(), Error> {
         Self::setup(addr)?;
-        self.read_async_internal(buffer, false, true).await
+        self.read_async_internal(buffer, true, true).await
     }
 
     pub async fn write_async(&mut self, addr: u16, bytes: impl IntoIterator<Item = u8>) -> Result<(), Error> {
         Self::setup(addr)?;
         self.write_async_internal(bytes, true).await
     }
+
+    pub async fn write_read_async(
+        &mut self,
+        addr: u16,
+        bytes: impl IntoIterator<Item = u8>,
+        buffer: &mut [u8],
+    ) -> Result<(), Error> {
+        Self::setup(addr)?;
+        self.write_async_internal(bytes, false).await?;
+        self.read_async_internal(buffer, true, true).await
+    }
 }
 
 pub struct InterruptHandler<T: Instance> {
@@ -318,6 +328,22 @@ impl<T: Instance> interrupt::typelevel::Handler<T::Interrupt> for InterruptHandl
     }
 }
 
+pub(crate) fn set_up_i2c_pin<'d, P, T>(pin: &P)
+where
+    P: core::ops::Deref<Target = T>,
+    T: crate::gpio::Pin,
+{
+    pin.gpio().ctrl().write(|w| w.set_funcsel(3));
+    pin.pad_ctrl().write(|w| {
+        w.set_schmitt(true);
+        w.set_slewfast(false);
+        w.set_ie(true);
+        w.set_od(false);
+        w.set_pue(true);
+        w.set_pde(false);
+    });
+}
+
 impl<'d, T: Instance + 'd, M: Mode> I2c<'d, T, M> {
     fn new_inner(
         _peri: impl Peripheral<P = T> + 'd,
@@ -355,23 +381,8 @@ impl<'d, T: Instance + 'd, M: Mode> I2c<'d, T, M> {
         p.ic_rx_tl().write(|w| w.set_rx_tl(0));
 
         // Configure SCL & SDA pins
-        scl.gpio().ctrl().write(|w| w.set_funcsel(3));
+        set_up_i2c_pin(&scl);
-        sda.gpio().ctrl().write(|w| w.set_funcsel(3));
+        set_up_i2c_pin(&sda);
-
-        scl.pad_ctrl().write(|w| {
-            w.set_schmitt(true);
-            w.set_ie(true);
-            w.set_od(false);
-            w.set_pue(true);
-            w.set_pde(false);
-        });
-        sda.pad_ctrl().write(|w| {
-            w.set_schmitt(true);
-            w.set_ie(true);
-            w.set_od(false);
-            w.set_pue(true);
-            w.set_pde(false);
-        });
 
         // Configure baudrate
 
@@ -713,7 +724,7 @@ mod nightly {
 
             Self::setup(addr)?;
             self.write_async_internal(write.iter().cloned(), false).await?;
-            self.read_async_internal(read, false, true).await
+            self.read_async_internal(read, true, true).await
         }
 
         async fn transaction(&mut self, address: A, operations: &mut [Operation<'_>]) -> Result<(), Self::Error> {

embassy-rp/src/i2c_slave.rs

@@ -5,12 +5,14 @@ use core::task::Poll;
 use embassy_hal_internal::into_ref;
 use pac::i2c;
 
-use crate::i2c::{i2c_reserved_addr, AbortReason, Instance, InterruptHandler, SclPin, SdaPin, FIFO_SIZE};
+use crate::i2c::{
+    i2c_reserved_addr, set_up_i2c_pin, AbortReason, Instance, InterruptHandler, SclPin, SdaPin, FIFO_SIZE,
+};
 use crate::interrupt::typelevel::{Binding, Interrupt};
 use crate::{pac, Peripheral};
 
 /// I2C error
-#[derive(Debug)]
+#[derive(Debug, PartialEq, Eq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 #[non_exhaustive]
 pub enum Error {
@@ -100,23 +102,8 @@ impl<'d, T: Instance> I2cSlave<'d, T> {
         p.ic_rx_tl().write(|w| w.set_rx_tl(0));
 
         // Configure SCL & SDA pins
-        scl.gpio().ctrl().write(|w| w.set_funcsel(3));
+        set_up_i2c_pin(&scl);
-        sda.gpio().ctrl().write(|w| w.set_funcsel(3));
+        set_up_i2c_pin(&sda);
-
-        scl.pad_ctrl().write(|w| {
-            w.set_schmitt(true);
-            w.set_ie(true);
-            w.set_od(false);
-            w.set_pue(true);
-            w.set_pde(false);
-        });
-        sda.pad_ctrl().write(|w| {
-            w.set_schmitt(true);
-            w.set_ie(true);
-            w.set_od(false);
-            w.set_pue(true);
-            w.set_pde(false);
-        });
 
         // Clear interrupts
         p.ic_clr_intr().read();

embassy-rp/src/lib.rs

@@ -1,5 +1,6 @@
 #![no_std]
 #![cfg_attr(feature = "nightly", feature(async_fn_in_trait, impl_trait_projections))]
+#![cfg_attr(feature = "nightly", allow(stable_features, unknown_lints, async_fn_in_trait))]
 
 // This mod MUST go first, so that the others see its macros.
 pub(crate) mod fmt;
@@ -10,6 +11,7 @@ mod critical_section_impl;
 mod intrinsics;
 
 pub mod adc;
+pub mod bootsel;
 pub mod clocks;
 pub mod dma;
 pub mod flash;
@@ -90,7 +92,8 @@ embassy_hal_internal::interrupt_mod!(
 #[macro_export]
 macro_rules! bind_interrupts {
     ($vis:vis struct $name:ident { $($irq:ident => $($handler:ty),*;)* }) => {
-        $vis struct $name;
+            #[derive(Copy, Clone)]
+            $vis struct $name;
 
         $(
             #[allow(non_snake_case)]
@@ -192,6 +195,7 @@ embassy_hal_internal::peripherals! {
     PIO1,
 
     WATCHDOG,
+    BOOTSEL,
 }
 
 macro_rules! select_bootloader {

embassy-rp/src/pio.rs

@@ -1079,18 +1079,43 @@ impl_pio!(PIO1, 1, PIO1, PIO1_0, PIO1_IRQ_0);
 pub trait PioPin: sealed::PioPin + gpio::Pin {}
 
 macro_rules! impl_pio_pin {
-    ($( $num:tt )*) => {
+    ($( $pin:ident, )*) => {
         $(
-            paste::paste!{
+            impl sealed::PioPin for peripherals::$pin {}
-                impl sealed::PioPin for peripherals::[< PIN_ $num >] {}
+            impl PioPin for peripherals::$pin {}
-                impl PioPin for peripherals::[< PIN_ $num >] {}
-            }
         )*
     };
 }
 
 impl_pio_pin! {
-    0 1 2 3 4 5 6 7 8 9
+    PIN_0,
-    10 11 12 13 14 15 16 17 18 19
+    PIN_1,
-    20 21 22 23 24 25 26 27 28 29
+    PIN_2,
+    PIN_3,
+    PIN_4,
+    PIN_5,
+    PIN_6,
+    PIN_7,
+    PIN_8,
+    PIN_9,
+    PIN_10,
+    PIN_11,
+    PIN_12,
+    PIN_13,
+    PIN_14,
+    PIN_15,
+    PIN_16,
+    PIN_17,
+    PIN_18,
+    PIN_19,
+    PIN_20,
+    PIN_21,
+    PIN_22,
+    PIN_23,
+    PIN_24,
+    PIN_25,
+    PIN_26,
+    PIN_27,
+    PIN_28,
+    PIN_29,
 }

embassy-rp/src/pwm.rs

@@ -10,16 +10,39 @@ use crate::gpio::sealed::Pin as _;
 use crate::gpio::{AnyPin, Pin as GpioPin};
 use crate::{pac, peripherals, RegExt};
 
+/// The configuration of a PWM slice.
+/// Note the period in clock cycles of a slice can be computed as:
+/// `(top + 1) * (phase_correct ? 1 : 2) * divider`
 #[non_exhaustive]
 #[derive(Clone)]
 pub struct Config {
+    /// Inverts the PWM output signal on channel A.
     pub invert_a: bool,
+    /// Inverts the PWM output signal on channel B.
     pub invert_b: bool,
+    /// Enables phase-correct mode for PWM operation.
+    /// In phase-correct mode, the PWM signal is generated in such a way that
+    /// the pulse is always centered regardless of the duty cycle.
+    /// The output frequency is halved when phase-correct mode is enabled.
     pub phase_correct: bool,
+    /// Enables the PWM slice, allowing it to generate an output.
     pub enable: bool,
+    /// A fractional clock divider, represented as a fixed-point number with
+    /// 8 integer bits and 4 fractional bits. It allows precise control over
+    /// the PWM output frequency by gating the PWM counter increment.
+    /// A higher value will result in a slower output frequency.
     pub divider: fixed::FixedU16<fixed::types::extra::U4>,
+    /// The output on channel A goes high when `compare_a` is higher than the
+    /// counter. A compare of 0 will produce an always low output, while a
+    /// compare of `top + 1` will produce an always high output.
     pub compare_a: u16,
+    /// The output on channel B goes high when `compare_b` is higher than the
+    /// counter. A compare of 0 will produce an always low output, while a
+    /// compare of `top + 1` will produce an always high output.
     pub compare_b: u16,
+    /// The point at which the counter wraps, representing the maximum possible
+    /// period. The counter will either wrap to 0 or reverse depending on the
+    /// setting of `phase_correct`.
     pub top: u16,
 }
 
@@ -173,6 +196,9 @@ impl<'d, T: Channel> Pwm<'d, T> {
         });
     }
 
+    /// Advances a slice’s output phase by one count while it is running
+    /// by inserting a pulse into the clock enable. The counter
+    /// will not count faster than once per cycle.
     #[inline]
     pub fn phase_advance(&mut self) {
         let p = self.inner.regs();
@@ -180,6 +206,9 @@ impl<'d, T: Channel> Pwm<'d, T> {
         while p.csr().read().ph_adv() {}
     }
 
+    /// Retards a slice’s output phase by one count while it is running
+    /// by deleting a pulse from the clock enable. The counter will not
+    /// count backward when clock enable is permenantly low.
     #[inline]
     pub fn phase_retard(&mut self) {
         let p = self.inner.regs();